L7810 查看數據表（PDF） - Hamamatsu Photonics
零件编号
产品描述 (功能)
生产厂家
L7810 Datasheet PDF : 2 Pages
| |||
SPECIFICATIONS
Lamp
Xenon Lamp
Input Voltage
100 Vac/115 Vac/200 Vac/230 Vac
Input Wattage
150 W
(switched manually)
(±10 %), 50/60 Hz
Spectral Distribution
Calibrated RangeA
185 nm to 2000 nm
250 nm to 800 nm
Power Consumption
Cooling (Lamp Housing,
500 VA
Forces Air Cooling
Type of Calibration
Calibration Unit
Spectral Irradiance
µW.cm-2.nm-1
Power Supply)
Ambient Temperature
(cooling fan is included)
0 °C to 40 °C
Stability Fluctuation (p-p) 1.0 % Max.
Humidity
30 % to 90 %
Drift
±0.5 %/h Max.
Dimensions Lamp Housing 100 mm × 280 mm × 100 mm
Window Material
(Lamp Housing)
Synthetic Silica
(W × H × D) Power Supply 144 mm × 176 mm × 280 mm
CaseD
595 mm × 425 mm × 345 mm
Warm-up Time
10 min
Lamp Housing Approx. 3.5 kg
Recommended Calibration 100 hours or 1 year whichever
PeriodB
comes first
Guaranteed LifeC
500 hours
Weight
Power Supply Approx. 10 kg
CaseD
Approx. 7.8 kg
NOTE: AThe calibrated value is the light power at 50 cm away from front surface of lamp housing.
BThis is the recommended calibration period when high reliability is required. Please contact to our sales office for re-calibration fee.
CThis is the guaranteed time the unit satisfies requirements as calibrated light source.
DThis is an accessory coming with the unit.
DIMENSIONAL OUTLINES (Unit: mm)
LAMP HOUSING
[FRONT VIEW]
COOLING FAN
M37 P=1
OUTPUT
WINDOW
( 28)
[SIDE VIEW]
SIDE COVER
MOUNTING
SCREW
4-M3
HEX SOCKET
HEAD BOLT
SIDE COVER
(REMOVE
THIS COVER
WHEN
REPLACING
LAMP)
CONNECTOR *
50
100
[BOTTOM VIEW]
M4
5
100
5
REFERENCE SURFACE
OF CALIBRATION
39
78
4-M4
PLASTIC FEET ARE ATTACHED TO
THE BOTTOM OF THE UNIT BUT
CAN BE REMOVED TO USE THEIR
HOLES FOR INSTALLATION OF THE
LAMP HOUSING.
TLSOA0066EA
POWER SUPPLY
XENON LAMP POWER SUPPLY
TIME COUNTER
hours
0.0
M 1A/125V
LAMP ON
CURRENT SEL
7.5 8.0 8.5
[Adc]
POWER
POWER
INTER LOCK
OVER HEAT
[FRONT VIEW]
280
144
SN.
OUTPUT
100/115/200/230
50/60 HZ
VOL. SEL
[SIDE VIEW]
CONNECTOR *
[REAR VIEW]
AC INPUT CONNECTOR
* For cable to connect lamp housing with power supply, length: 2000
TLSOA0067EA
Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office.
Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are
subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2000 Hamamatsu Photonics K.K
HOMEPAGE URL http://www.hamamatsu.com
HAMAMATSU PHOTONICS K.K., Electron Tube Center
314-5, Shimokanzo, Toyooka-village, Iwata-gun, Shizuoka-ken, 438-0193, Japan, Telephone: (81)539/62-5248, Fax: (81)539/62-2205
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P. O. Box 6910, Bridgewater. N.J. 08807-0910, U.S.A., Telephone: (1)908-231-0960, Fax: (1)908-231-1218 E-mail: usa@hamamatsu.com
Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658 E-mail: info@hamamatsu.de
France: Hamamatsu Photonics France S.A.R.L.: 8, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10 E-mail: france@hamamatsu.com
United Kingdom: Hamamatsu Photonics UK Limited: Lough Point, 2 Gladbeck Way, Windmill Hill, Enfield, Middlesex EN2 7JA, United Kingdom, Telephone: 44(20)8-367-3560, Fax: 44(20)8-367-6384 E-mail: info@hamamatsu.co.uk
North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171-41 SOLNA, Sweden, Telephone: (46)8-509-031-00, Fax: (46)8-509-031-01 E-mail: info@hamamatsu.se
Italy: Hamamatsu Photonics Italia: S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39)02-935 81 733, Fax: (39)02-935 81 741 E-mail: info@hamamatsu.it
TLSO1039E01
JUN. 2000 SI
Printed in Japan(1000)
Share Link: 