DA28F016SA-150 查看數據表（PDF） - Intel
零件编号
产品描述 (功能)
生产厂家
DA28F016SA-150 Datasheet PDF : 55 Pages
| |||
E
28F016SA
5.0 ELECTRICAL SPECIFICATIONS
5.1 Absolute Maximum Ratings*
NOTICE: This is a production datasheet. The specifications
are subject to change without notice. Verify with your local
Intel Sales office that you have the latest datasheet before
finalizing a design.
Temperature under Bias .....................0°C to +80°C
Storage Temperature....................–65°C to +125°C
VCC = 3.3V ± 10% Systems
* WARNING: Stressing the device beyond the “Absolute
Maximum Ratings” may cause permanent damage. These
are stress ratings only. Operation beyond the “Operating
Conditions” is not recommended and extended exposure
beyond the "Operating Conditions" may effect device
reliability.
Sym
Parameter
Notes Min Max Units Test Conditions
TA Operating Temperature, Commercial
1
0 70 °C Ambient Temperature
VCC VCC with Respect to GND
2 –0.2 7.0 V
VPP VPP Supply Voltage with Respect to GND
V
Voltage on Any Pin (Except VCC, VPP)
with Respect to GND
I
Current into Any Non-Supply Pin
2,3 –0.2 14.0 V
2
–0.5 VCC
V
+0.5
5
± 30 mA
IOUT Output Short Circuit Current
4
100 mA
VCC = 5.0V ± 10% , VCC = 5.0V ± 5% Systems(6)
Sym
Parameter
Notes Min
Max Units
Test Conditions
TA Operating Temperature, Commercial
1
0 70 °C Ambient Temperature
VCC VCC with Respect to GND
2 –0.2 7.0 V
VPP VPP Supply Voltage with Respect to GND 2,3 –0.2 14.0 V
V
Voltage on Any Pin (Except VCC, VPP)
with Respect to GND
2 –2.0 7.0 V
I
Current into Any Non-Supply Pin
5
± 30 mA
IOUT Output Short Circuit Current
4
100 mA
NOTES:
1. Operating temperature is for commercial product defined by this specification.
2. Minimum DC voltage is –10% on input/output pins. During transitions, this level may undershoot to –2.0V for periods
<20 ns. Maximum DC voltage on input/output pins is VCC + 10% which, during transitions, may overshoot to VCC + 2.0V for
periods <20 ns.
3. Maximum DC voltage on VPP may overshoot to +14.0V for periods <20 ns.
4. Output shorted for no more than one second. No more than one output shorted at a time.
5. This specification also applies to pins marked “NC.”
6. 5% VCC specifications refer to the 28F016SA-070 in its High Speed Test configuration.
21
Share Link: 