DA28F016SA-150 查看數據表（PDF） - Intel
零件编号
产品描述 (功能)
生产厂家
DA28F016SA-150 Datasheet PDF : 55 Pages
| |||
E
28F016SA
5.5 DC Characteristics: COMMERCIAL AND
(Continued)
VCC = 5.0V ± 10%, 5.0V ± 5%,TA = 0°C to +70°C, -40°C to +85°C
3/5# Pin Set Low for 5V Operations
EXTENDED
TEMPERATURE
Temp Comm/Extended
Sym
Parameter
Notes Min Typ Max Units
Test Conditions
IPPW
IPPE
IPPES
VIL
VPP Program Current for
Word or Byte
VPP Block Erase
Current
VPP Erase Suspend
Current
Input Low Voltage
1
7
12
mA VPP = VPPH
Program in Progress
1
5
10
mA VPP = VPPH
Block Erase in Progress
1
65 200 µA VPP = VPPH
Block Erase Suspended
–0.5
0.8
V
VIH
Input High Voltage
2.0
VCC
V
+0.5
VOL
Output Low Voltage
0.45
V
VCC = VCC Min
IOL = 5.8 mA
VOH1 Output High Voltage
0.85
VCC
V
VCC = VCC Min
IOH = –2.5 mA
VOH2
VCC
–0.4
V
VCC = VCC Min
IOH = –100 µA
VPPL
VPP during Normal
Operations
3 0.0
6.5
V
VPPH
VPP during Program/
Erase Operations
11.4 12.0 12.6 V
VLKO VCC Program/Erase
2.0
V
Lock Voltage
NOTES:
1. All currents are in RMS unless otherwise noted. Typical values at VCC = 5.0V, VPP = 12.0V, T = 25°C. These currents are
valid for all product versions (package and speeds).
2. ICCES is specified with the device deselected. If the device is read while in erasesuspend mode, current draw is the sum of
ICCES and ICCR.
3. Block erases, word/byte programs and lock block operations are inhibited when VPP = VPPL and not guaranteed in the
range between VPPH and VPPL.
4. Automatic Power Saving (APS) reduces ICCR to less than 2 mA in static operation.
5. CMOS Inputs are either VCC ± 0.2V or GND ± 0.2V. TTL Inputs are either VIL or VIH.
6. Standby current levels are not reached when putting the chip in standby mode immediately after reading the page buffer.
Default the device into read array or read Status Register mode before entering standby to ensure standby current levels.
31
Share Link: 