MAX3667E(1998) 查看數據表（PDF） - Maxim Integrated

零件编号

产品描述 (功能)

生产厂家

MAX3667E
(Rev.:1998)

+3.3V, 622Mbps SDH/SONET Laser Driver with Automatic Power Control

Maxim Integrated 

+3.3V, 622Mbps SDH/SONET Laser Driver

with Automatic Power Control

IBIAS

DISABLE

MAX3667

MD

IN+

IN-

REFERENCE

31Ω

PULLUP

IMOD

COMP

OTA

APC

1.0V

Figure 2. Block Diagram

1.0V

MODSET

MODMON

1.0V

BIASSET

BIASMON

1.0V

APCSET

Closed-loop operation requires the user to establish

three internal currents with external resistors placed

between ground and the BIASSET, MODSET, and APC-

SET pins. See the Design Procedures section for guide-

lines on selecting these resistor values.

Open-Loop Operation

If desired, the MAX3667 is fully operational without the

use of the APC loop. In these types of applications, the

laser diode current is set solely by the external resistors

connected to the BIASSET and MODSET pins. See the

Design Procedures section for instructions on setting

up the MAX3667 for open-loop operation.

Disable Control

The MAX3667 provides a single-ended TTL-compatible

disable control pin. The IBIAS, IMOD, and APCSET cur-

rents are disabled when the voltage on this pin is set

high. However, the internal voltage reference and other

sections of the MAX3667 remain active to ensure pre-

dictable operation and faster enable response times.

The disable response time is approximately 25ns.

Temperature Considerations

The MAX3667 contains a voltage reference that is fully

temperature compensated. This reference is used

throughout the circuit, as well as for programming the

_______________________________________________________________________________________ 7

Share Link: