DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

MAX8717 查看數據表(PDF) - Maxim Integrated

零件编号
产品描述 (功能)
生产厂家
MAX8717 Datasheet PDF : 30 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
Interleaved High-Efficiency, Dual Power-Supply
Controllers for Notebook Computers
ELECTRICAL CHARACTERISTICS (continued)
(Circuit of Figure 1, VIN = 12V, FSEL = REF, SKIP_ = 0, VON_ = VILIM_ = VCC = VDD = 5V, TA = -40°C to +85°C, unless otherwise
noted.) (Note 6)
PARAMETER
Current-Limit Threshold (Fixed)
Current-Limit Threshold
(Adjustable)
REFERENCE (REF)
Reference Voltage
FAULT DETECTION
Output Overvoltage Trip
Threshold
SYMBOL
CONDITIONS
VLIMIT_
VLIMIT_
VCSH_ - VCSL _, ILIM_ = VCC (Note 3)
VCSH_ - VCSL _
VILIM_ = 2.00V
VILIM_ = 1.00V
VREF VCC = 4.5V to 5.5V, IREF = 0
MAX8716/MAX8717 only
MIN TYP MAX UNITS
44
56
mV
188
212
mV
93
107
1.98
2.02
V
11
19
%
Output Undervoltage-Protection
Trip Threshold
With respect to error-comparator threshold
65
75
%
PGOOD_ Lower Trip Threshold
PGOOD_ Output Low Voltage
GATE DRIVERS
DH_ Gate-Driver On-Resistance
DL_ Gate Driver On-Resistance
INPUTS AND OUTPUTS
ON_ Input Voltage
Three-Level Input Logic
With respect to error-comparator threshold,
hysteresis = 1%
ISINK = 4mA
-12.5
RDH BST_ - LX_ forced to 5V (Note 5)
DL_, high state (Note 5)
RDL
DL_, low state (Note 5)
Rising edge, hysteresis = 225mV
SKIP1, SKIP2, FSEL
High
REF
GND
1.2
VCC -
0.2
1.7
-8.0
%
0.4
V
5
5
3
2.2
V
2.3
V
0.5
Note 2: When the inductor is in continuous conduction, the output voltage will have a DC regulation level lower than the error-com-
parator threshold by 50% of the ripple. In discontinuous conduction, the output voltage will have a DC regulation level high-
er than the error-comparator threshold by 50% of the ripple.
Note 3: Default setting for the MAX8716.
Note 4: Specifications are guaranteed by design, not production tested.
Note 5: Production testing limitations due to package handling require relaxed maximum on-resistance specifications for the thin QFN
package.
Note 6: Specifications from 0°C to -40°C are guaranteed by design, not production tested.
6 _______________________________________________________________________________________

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]