RP104Q201D 查看數據表（PDF） - RICOH Co.,Ltd.
零件编号
产品描述 (功能)
生产厂家
RP104Q201D Datasheet PDF : 32 Pages
| |||
TYPICAL APPLICATION
C1
VDD
VOUT
RP104x
Series
CE GND
VOUT
C2
RP104x
(External Components)
C2 0.1µF MURATA: GRM155B31C104KA87B
TECHNICAL NOTES
When using these ICs, consider the following points:
Phase Compensation
In these ICs, phase compensation is made for securing stable operation even if the load current is varied. For
this purpose, use a capacitor C2 with good frequency characteristics and ESR (Equivalent Series Resistance).
(Note: If additional ceramic capacitors are connected with parallel to the output pin with an output capacitor for
phase compensation, the operation might be unstable. Because of this, test these ICs with as same external
components as ones to be used on the PCB.)
PCB Layout
Make VDD and GND lines sufficient. If their impedance is high, noise pickup or unstable operation may result.
Connect a capacitor C1 with a capacitance value as much as 0.1µF or more between VDD and GND pin, and as
close as possible to the pins.
Set external components, especially the output capacitor C2, as close as possible to the ICs, and make wiring
as short as possible.
7
Share Link: 