SC18IM700IPW/S8HP 查看數據表（PDF） - NXP Semiconductors.

零件编号

产品描述 (功能)

生产厂家

SC18IM700IPW/S8HP

Master I2C-bus controller with UART interface

NXP Semiconductors. 

NXP Semiconductors

SC18IM700

Master I2C-bus controller with UART interface

7.1.4 Read from 18IM internal register

The host issues the internal register read command by sending an R character followed

by the registers to be read. The frame is then terminated with a P character.

Once the command is issued, SC18IM700 will access its internal registers and returns the

contents of these registers to the host.

R CHAR. REGISTER 0

18IM responds

DATA 0

DATA N

Fig 6. Read from 18IM internal register

REGISTER N P CHAR.

002aac051

7.1.5 Write to GPIO port

The host issues the output port write command by sending an O character followed by the

data to be written to the output port. This command enables the host to quickly set any

GPIO pins programmed as output without having to write to the SC18IM700 internal

IOState register.

Fig 7. Write to output port

O CHAR.

DATA

P CHAR.

002aac052

7.1.6 Read from GPIO port

The host issues the input port read command by sending an I character. This command

enables the host to quickly read any GPIO pins programmed as input without having to

read the SC18IM700 internal IOState register.

Once the command is issued, SC18IM700 will read its internal IOState register and

returns its content to the host.

Fig 8. Read from output port

I CHAR. P CHAR.

18IM responds

DATA

002aac053

7.1.7 Repeated START: read after write

The SC18IM700 also supports ‘read after write’ command as specified in the NXP

Semiconductors I2C-bus specification. This allows a read command to be sent after a

write command without having to issue a STOP condition between the two commands.

The host issues a write command as normal, then immediately issues a read command

without sending a STOP (P) character after the write command.

SC18IM700_3

Product data sheet

All information provided in this document is subject to legal disclaimers.

Rev. 3 — 12 October 2017

© NXP Semiconductors N.V. 2017. All rights reserved.

6 of 24

Share Link: