SPT5400SCP 查看數據表（PDF） - Cadeka Microcircuits LLC.
零件编号
产品描述 (功能)
生产厂家
SPT5400SCP Datasheet PDF : 8 Pages
| |||
PIN ASSIGNMENTS
VOUTB
VOUTA
VDD
REFAB
AGNDAB
LDAB
LDCD
CS
WR
A2
A1
6
7
17
18
1 44
Top View
40
39
29
28
VOUTG
VOUTH
VDD
REFGH
AGNDGH
GND
LDGH
LDEF
D0
D1
D2
PIN FUNCTIONS
Name
CLR
AGNDCD
REFCD
VSS
VOUTD
VOUTC
VOUTB
VOUTA
Function
Clear input (active low). Driving this asynchronous
input low sets the content of all latches to 1000hex.
All DAC outputs are reset to AGNDxx.
Analog ground for DAC C and DAC D.
Reference voltage input for DAC C and DAC C.
Bypass to AGNDCD with a 0.1 to 1 µF capacitor.
Negative power supply, –5 V (two pins). Connect
both pins to the supply voltage. Bypass each pin to
the system analog ground with a 0.1 µF capacitor.
DAC D output voltage.
DAC C output voltage.
DAC B output voltage.
DAC A output voltage.
ORDERING INFORMATION
Name
VDD
REFAB
AGNDAB
LDAB
LDCD
CS
WR
A2
A1
A0
D12–D0
LDEF
LDGH
GND
AGNDGH
REFGH
VOUTH
VOUTG
VOUTF
VOUTE
REFEF
AGNDEF
Function
Positive power supply, +5 V (two pins). Connect
both pins to the supply voltage. Bypass each pin to
the system analog ground with a 0.1 µF capacitor.
Reference voltage input for DAC A and DAC B.
Bypass to AGNDAB with a 0.1 to 1 µF capacitor.
Analog ground for DAC A and DAC B.
Load input (active low). Driving this asynchronous
input low transfers the contents of the input latches
A and B to the respective DAC latches.
Load input (active low). Driving this asynchronous
input low transfers the contents of the input latches
C and D to the respective DAC latches.
Chip select (active low).
Write input (active low). WR along with CS load data
into the DAC input latch selected by A0–A2.
Address bit 2.
Address bit 1.
Address bit 0.
Data bits 12–0. (D0 = LSB)
Load input (active low). Driving this asynchronous
input low transfers the contents of the input latches
E and F to the respective DAC latches.
Load input (active low). Driving this asynchronous
input low transfers the contents of the input latches
G and H to the respective DAC latches.
Digital ground.
Analog ground for DAC G and DAC H.
Reference voltage input for DAC G and DAC H.
Bypass to AGNDGH with a 0.1 to 1 µF capacitor.
DAC H output voltage.
DAC G output voltage.
DAC F output voltage.
DAC E output voltage.
Reference voltage input for DAC E and DAC F.
Bypass to AGNDEF with a 0.1 to 1 µF capacitor.
Analog ground for DAC E and DAC F.
PART NUMBER
SPT5400SCP
TEMPERATURE RANGE
0 to +70 °C
PACKAGE
44L PLCC
SPT5400
8
5/15/00
Share Link: 