DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

STFPC311 查看數據表(PDF) - STMicroelectronics

零件编号
产品描述 (功能)
生产厂家
STFPC311 Datasheet PDF : 39 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
STFPC311
Front panel controller/driver
with standby power management
Features
IC front panel controller/driver
Timing power standby management controller
IC power supply from 3.3V (VDD) to –30V (VSS)
Integrated VFD driver and controller
Infrared (IR) Remote Control (RC) Decoder
(Philips or NEC format)
Drives many display modes (12 segments/16
digits to 20 segments/8 digits)
High voltage outputs (VDD - 33.3V max)
No external resistors necessary for driver
outputs (P-channel open- drain with pull-down
resistor outputs)
Key scanning (up to 12mm x 2mm matrix)
Led ports (4 channels, 20mA, max)
Serial interface (STB, CLK, DIN, and DOUT)
communication protocol
Dimming circuit (adjustable up to 8 steps)
Supports auto-increment of display digit, which
lightens the load on the MCU
Programmable 8 hot keys for the IR remote
control command
Programmable 8 hot keys for key scan
command
Low power consumption in standby mode
2 general purpose input ports (SW1, SW2)
Available in PQFP-52 package
Order Codes
PQFP-52
Description
The STFPC311 is a complete, low-cost,
integrated solution for controlling and driving a
front panel Vacuum Fluorescent Display (VFD). It
is ideal for decreasing power consumption in
standby mode by reducing the application standby
current to a minimum. It also contains a built-in
remote control decoder module.
While in the standby mode of operation, a valid
key press or signal from infrared decoder will start
a proper power-up see Figure 6 on page 12.
The STFPC311 integrates a VFD controller with a
driver that is run on a 1/8 to 1/16-duty factor. It
consists of 12 segments output lines, 8 grid output
lines, 8 shared segments/grid output drive lines, a
display memory, a control circuit, and a key scan
circuit. Serial data is input to the STFPC311
through the SPI Interface of a microcontroller
(STB, DIN, DOUT, and CLK).
Additionally, this IC can support 2 general
purpose input switches (SW1 and SW2).
Features
DVD players
VCD players
AV equipment like Home Stereo
POS Systems
Part number
STFPC311
Temperature range
-40 to 85°C
Package
PQFP-52
May 2006
Rev 1
1/39
www.st.com
39

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]