333-A2C1-ASWB 查看數據表（PDF） - EVERLIGHT

零件编号

产品描述 (功能)

生产厂家

333-A2C1-ASWB

Light Emitting Diode (5 mm Round LED,T-1 3/4)

EVERLIGHT 

EVERLIGHT ELECTRONICS CO.,LTD.

Technical Data Sheet

Light Emitting Diode (5 mm Round LED,T-1 3/4)

333/A2C1-ASWB

6. Soldering Condition

Careful attention should be paid during soldering. When soldering, leave more then 3mm

from solder joint to case, and soldering beyond the base of the tie bar is recommended.

Avoiding applying any stress to the lead frame while the LEDs are at high temperature

particularly when soldering.

Recommended soldering conditions:

Hand Soldering

400℃ Max. (30W

Temp. at tip of iron

Max.)

DIP Soldering

Preheat temp. 100℃ Max. (60 sec Max.)

Soldering time

3 sec Max.

Bath temp.

265 Max.

Distance

3mm Min.(From solder Bath time.

5 sec Max.

joint to case)

Distance

3mm Min.

EVERLIGHT ELECTRONICS CO., LTD.

Office: No 25, Lane 76, Sec 3, Chung Yang Rd,

Tucheng, Taipei 236, Taiwan, R.O.C

Tel: 886-2-2267-2000, 2267-9936

Fax: 886-2267-6244, 2267-6189, 2267-6306

http:\\www.everlight.com

Everlight Electronics Co., Ltd.

Device Number : DLE-033-B69

http\\:www.everlight.com

Prepared date: 12-04-2006

Rev 1

Page: 7 of 7

Prepared by: Flourix Chen

Share Link: