EKK8011 查看數據表（PDF） - ELAN Microelectronics

零件编号

产品描述 (功能)

生产厂家

EKK8011

USB & PS/2 Keyboard Encoder

ELAN Microelectronics 

eKK8011

USB & PS/2 Keyboard Encoder

keyboard checks clock line status at least every 5 milliseconds. If a system Request

to Send(RTS) is detected, the keyboard clocks 11 bits in. After the 10th bit, the

keyboard checks for a high state in data line then pulls it low and clocks one more bit

to signal the system that data has been received. If data is low after the 10th bit, it

indicates a frame error. The keyboard should continue to count until data line goes

high, then pulls it low and issues a RESEND to the system.

6.1.5 Command from the System

The system can send commands to the keyboard at any time. The keyboard needs

to respond within 20 milliseconds, unless the system prevents keyboard output, when

doing self test or executing a RESET. The following are the keyboard input

commands and the actions that keyboard needs to take.

Set /Reset Status indicators ( Hex ED )

- Responds ACK.

- Receives option byte.

- Responds ACK.

- Updates status indicators.

- Returns to previous scanning state.

Echo ( Hex EEH )

- Responds with EE hex.

- Returns to previous scanning state.

Invalid commands ( Hex EF and F1 )

- Returns a RESEND command.

- Returns to previous scanning state.

Select Alternate Scan Codes ( Hex F0 )

- Responds ACK.

- Clears output buffer.

- Sets the default typematic rate/delay.

- Clears last typematic key.

- Receives option byte.

Product Specification (V1.0) 06.10.2003

5

(This specification is subject to change without further notice)

Share Link: