IQ70-HPC 查看數據表（PDF） - SynQor Worldwide Headquarters
零件编号
产品描述 (功能)
生产厂家
IQ70-HPC Datasheet PDF : 28 Pages
| |||
Technical
Specification
IQ70-HPC Family
MECHANICAL DIAGRAM
2.00 (50.8)
1.000 (25.40)
0.700 (17.78)
0.400 (10.16)
2.486±.020 (63.14±0.5)
1.400 (35.56)
0.243±.020
(6.17±0.5)
0.512 +0.002/-0.005
(13 +0.05/-0.12)
Overall height
2.386±.020
(60.6±0.5)
1.90
(48.3)
0.233
±.020
(5.92 ±0.5)
8 765 4
Top View
M3 Threaded Standoff
4 Places
12
3
1.90
(48.3)
0.18
(5.0)
Side View
.543±.020
(13.79±0.5)
0.400 (10.16)
1.400 (35.56)
0.027 +0.007/-0.010
(0.69 +0.17/-0.25)
Bottom side
Clearance
nOteS
1) Pins 1-3, 5-7 are 0.040” (1.02mm) diameter, with 0.080”
(2.03mm) diameter standoff shoulders.
2) Pins 4 and 8 are 0.080” (2.03 mm) diameter with 0.125”
(3.18 mm) diameter standoff shoulders.
3) Recommended pin length is 0.03" (0.76 mm) greater than the PCB
thickness.
4) All Pins: Material - Copper Alloy; Finish - Matte Tin over Nickel plate
5) Weight: 5 oz. (142 g) typical
6) All dimensions in inches (mm) Tolerances:
x.xx +/-0.02 in. (x.x +/-0.5mm)
x.xxx +/-0.010 in. (x.xx +/-0.25mm)
unless otherwise noted.
7) Workmanship: Meets or exceeds IPC-A-610C Class II
8) Applied torque per screw should not exceed 6in-lb. (0.7 Nm).
9) Baseplate flatness tolerance is 0.004" (.10 mm) TIR for surface.
PIn DeSIGnAtIOnS
Pin name Function
1 Vin(+) Positive input voltage
TTL input to turn converter on
2 ON/OFF and off, referenced to Vin(–), with
internal pull up.
3 Vin(–) Negative input voltage
4 Vout(–) Negative output voltage
5 SENSE(–) Negative remote sense1
6 TRIM Output voltage trim2
7 SENSE(+) Positive remote sense3
8 Vout(+) Positive output voltage
Notes:
1) SENSE(–) should be connected to Vout(–) either
remotely or at the converter.
2) Leave TRIM pin open for nominal output voltage.
3) SENSE(+) should be connected to Vout(+)
either remotely or at the converter.
Product # IQ70xxxHPCxx
Phone 1-888-567-9596
www.synqor.com
Doc.# 005-005061 Rev. B
12/10/08
Page 2
Share Link: 