MF1SPLUS6001DA4/03 查看數據表（PDF） - NXP Semiconductors.

零件编号

产品描述 (功能)

生产厂家

MF1SPLUS6001DA4/03

Mainstream contactless smart card IC for fast and easy solution development

NXP Semiconductors. 

NXP Semiconductors

MF1SPLUSx0y1

Mainstream contactless smart card IC

8.3 Security level switching

The MIFARE Plus S offers a unique feature to support migration from CRYPTO1 based

systems to AES based operation. The migration on the card-side is done using different

security levels supporting different cryptographic algorithms and protocols. There are

three security levels:

• Security level 0: initial delivery configuration, used for card personalization

• Security level 1: backwards functional compatibility mode (with MIFARE Classic 1K

and MIFARE Classic 4K) with an optional AES authentication

• Security level 3: 3-Pass authentication based on AES, data manipulation commands

secured by AES encryption and an AES based MACing method.

The security level switching (i.e. from security level 1 to security level 3) is performed

using the dedicated AES authentication switching keys.

The security level can only be switched from a lower level to a higher level, never in the

opposite direction.

8.4 Security level 0

Security level 0 is the initial delivery configuration of the PICC. The card can be operated

either using the backwards compatibility protocol or the ISO/IEC 14443-4 protocol.

In this level, the card can be personalized including the programming of user data as well

as of CRYPTO1 and/or AES keys. In addition, the originality function can be used.

The following mandatory AES keys need to be written using the Write Perso command

before the PICC can be switched to security level 1 or security level 3 (for L3 card).

Security level switching is performed using the Commit Perso command:

• Card Configuration Key

• Card Master Key

• Level 3 Switch Key

Using the originality function, it is possible to verify that the chip is a genuine

NXP Semiconductors MIFARE Plus.

8.5 Security level 1

Security level 1 offers the same functionality as a MIFARE Classic 1K and MIFARE

Classic 4K using the backwards compatibility protocol. The MIFARE Classic 1K and

MIFARE Classic 4K products are specified in Ref. 1 and Ref. 2.

Furthermore, an optional AES authentication is available in this level without affecting the

MIFARE Classic 1K and MIFARE Classic 4K functionality. The authenticity of the card can

be proven using strong cryptographic means with this additional functionality.

The timings may differ from the MIFARE Classic 1K and MIFARE Classic 4K products.

Using the originality function, it is possible to verify that the chip is a genuine

NXP Semiconductors MIFARE Plus.

MF1SPLUSX0Y1_SDS

Product short data sheet

PUBLIC

All information provided in this document is subject to legal disclaimers.

Rev. 3.2 — 21 February 2011

187032

© NXP B.V. 2011. All rights reserved.

8 of 17

Share Link: