R8C/11 Group
1. Overview
1.2 Performance Outline
Table 1.1. lists the performance outline of this MCU.
Table 1.1 Performance outline
Item
Performance
CPU
Number of basic instructions 89 instructions
Shortest instruction execution time 50 ns (f(XIN) = 20 MHZ, VCC = 3.0 to 5.5 V)
100 ns (f(XIN) = 10 MHZ, VCC = 2.7 to 5.5 V)
Operating mode
Single-chip
Address space
1M bytes
Memory capacity
See Table 1.2.
Peripheral Interrupt
Internal: 11 factors, External: 5 factors,
function
Software: 4 factors, Priority level: 7 levels
Watchdog timer
15 bits x 1 (with prescaler)
Timer
Timer X: 8 bits x 1 channel, Timer Y: 8 bits x 1 channel,
Timer Z: 8 bits x 1 channel
(Each timer equipped with 8-bit prescaler)
Timer C: 16 bits x 1 channel
Circuits of input capture and output compare.
Serial Interface
•1 channel
Clock synchronous, UART
•1 channel
UART
A/D converter
10-bit A/D converter: 1 circuit, 12 channels
Clock generation circuit
2 circuits
•Main clock generation circuit (Equipped with a built-in
feedback resistor)
•On-chip oscillator (high speed, low speed)
On high-speed on-chip oscillator the frequency adjust-
ment function is usable.
Oscillation stop detection function Stop detection of main clock oscillation
Voltage detection circuit
Included
Power on reset circuit
Included
Port
Input/Output: 22 (including LED drive port), Input: 2
(LED drive I/O port: 8)
Electrical Power supply voltage
characteristics
Power consumption
Flash memory Program/erase voltage
Number of program/erase
VCC = 3.0 to 5.5 V (f(XIN) = 20 MHZ)
VCC = 2.7 to 5.5 V (f(XIN) = 10 MHZ)
Typ. 9 mA (VCC = 5.0 V, (f(XIN) = 20 MHZ, High-speed mode)
Typ. 5 mA (VCC = 3.0 V, (f(XIN) = 10 MHZ, High-speed mode)
Typ. 35 µA (VCC = 3.0 V, Wait mode, Peripheral clock stops)
Typ. 0.7 µA (VCC = 3.0 V, Stop mode)
VCC = 2.7 to 5.5 V
100 times
Operating ambient temperature
-20 to 85 °C
-40 to 85 °C (D-version)
Package
32-pin plastic mold LQFP
Rev.1.40 Sep 30, 2004 page 2 of 26
REJ03B0034-0140Z