MAX19710EVKIT 查看數據表（PDF） - Maxim Integrated

零件编号

产品描述 (功能)

生产厂家

MAX19710EVKIT

MAX19710–MAX19713 Evaluation Kits/Evaluation Systems

Maxim Integrated 

MAX19710–MAX19713 Evaluation

Kits/Evaluation Systems

Common Component List

(continued)

DESIGNATION

U7

—

—

QTY

DESCRIPTION

1 Quad-level translator

Maxim MAX3023EUD+ (14-pin TSSOP)

6 Shunts

1 PCB: MAX19710/1/2/3

Evaluation Kit+

MAX19713EVCMODU

(MAX19713 EV System)

Component List

PART

CMODUSB

MAX19713EVKIT+

QTY

DESCRIPTION

1 SPI interface board

1 MAX19713 EV kit

EV Kit-Specific Component List

EV KIT PART

NUMBER

D ESIG N AT IO N

DESCRIPTION

MAX19713EVKIT+

Maxim MAX19713ETN+ (56-

pin, 7mm x 7mm Thin QFN-EP)

MAX19712EVKIT+

MAX19711EVKIT+

Maxim MAX19712ETN+ (56-

pin, 7mm x 7mm Thin QFN-EP)

U1

Maxim MAX19711ETN+ (56-

pin, 7mm x 7mm Thin QFN-EP)

MAX19710EVKIT+

Maxim MAX19710ETN+ (56-

pin, 7mm x 7mm Thin QFN-EP)

Quick Start

Recommended Equipment

• DC power supplies:

Analog (VDD)

+3.0V, 100mA

Clock (CVDD)

+3.0V, 100mA

Digital (OVDD)

+1.8V, 100mA

Op-amp positive (VOP) 5.0V, 250mA

Op-amp negative (VON) -5.0V, 250mA

• Signal generator with low phase noise and low jitter

for clock input signal (e.g., HP/Agilent 8662A,

HP/Agilent 8644B)

• Two signal generators with low phase noise for ana-

log signal inputs (e.g., HP/Agilent 8662A, HP/Agilent

8644B)

• Logic analyzer or data-acquisition system with one

data pod (e.g., HP/Agilent 16500C, TLA621)

Component Suppliers

SUPPLIER

PHONE

WEBSITE

AVX Corp.

843-946-0238 www.avxcorp.com

Central

631-435-1110 www.centralsemi.com

Semiconductor

Coilcraft

847-639-6400 www.coilcraft.com

Diodes Inc.

805-446-4800 www.diodes.com

Murata

770-436-1300 www.murata.com

Panasonic

714-373-7366 www.panasonic.com

TDK Corp.

847-803-6100 www.component.tdk.com

Vishay

203-268-6261 www.vishay.com

Note: Indicate that you are using the MAX19710, MAX19711,

MAX19712, or MAX19713 when contacting these component

suppliers.

• Analog bandpass filters (e.g., Allen Avionics, K&L

Microwave) for input and clock signal

• Two spectrum analyzers (e.g., HP/Agilent 8560E)

• One digital pattern generator with one 10-bit data

pod (e.g., Tektronix DG2020A)

Procedure

The MAX19710–MAX19713 EV kits are fully assembled

and tested surface-mount boards. Follow the steps below

to verify board operation. Caution: Do not turn on

power supplies or enable signal/data generators until

all connections are completed.

Note: In the following sections, software-related items

are identified by bolding. Text in bold refers to items

directly from the EV kit software. Text in bold and

underlined refers to items from the Windows

98SE/2000/XP operating system.

Command Module Setup (CMODUSB)

1) Visit the Maxim website (www.maxim-ic.com/evkit-

software) to download the latest version of the EV

kit software. Save the EV kit software to a temporary

folder and uncompress the ZIP file.

2) Install the EV kit software on your computer by run-

ning the INSTALL.EXE program inside the temporary

folder. The program files are copied and icons are

created in the Windows Start | Programs menu.

3) Place a shunt across pins 2-3 of the VDD select

jumper (command module working voltage set

to 3.3V).

4) Connect a USB cable from the computer’s USB

port to the command module (CMODUSB) interface

board. Use a standard USB A-B cable. A Building

_______________________________________________________________________________________ 3

Share Link: