MX25L1606EM1I-12G 查看數據表（PDF） - Macronix International

零件编号

产品描述 (功能)

生产厂家

MX25L1606EM1I-12G

8M-BIT / 16M-BIT [x 1 / x 2] CMOS SERIAL FLASH

Macronix International 

MX25L8006E

MX25L1606E

FEATURES

8M-BIT [x 1 / x 2] CMOS SERIAL FLASH

16M-BIT [x 1 / x 2] CMOS SERIAL FLASH

GENERAL

• Single Power Supply Operation

- 2.7 to 3.6 volt for read, erase, and program operations

• Serial Peripheral Interface compatible -- Mode 0 and Mode 3

• 8M: 8,388,608 x 1 bit structure or 4,194,304 x 2 bits (Dual Output mode) structure

16M: 16,777,216 x 1 bit structure or 8,388,608 x 2 bits (Dual Output mode) structure

• 256 Equal Sectors with 4K byte each (8Mb)

512 Equal Sectors with 4K byte each (16Mb)

- Any Sector can be erased individually

• 16 Equal Blocks with 64K byte each (8Mb)

32 Equal Blocks with 64K byte each (16Mb)

- Any Block can be erased individually

• Program Capability

- Byte base

- Page base (256 bytes)

• Latch-up protected to 100mA from -1V to Vcc +1V

PERFORMANCE

• High Performance

- Fast access time: 86MHz serial clock

- Serial clock of Dual Output mode : 80MHz

- Fast program time: 1.4ms(typ.) and 5ms(max.)/page

- Byte program time: 9us (typical)

- Fast erase time: 60ms(typ.) /sector ; 0.7s(typ.) /block

• Low Power Consumption

- Low active read current: 16Mb: 25mA(max.) at 86MHz; 8Mb: 12mA(max.) at 86MHz

- Low active programming current: 20mA (max.)

- Low active erase current: 20mA (max.)

- Low standby current: 25uA (max.)

- Deep power-down mode 5uA (typical)

• Typical 100,000 erase/program cycles

• 20 years of data retention

SOFTWARE FEATURES

• Input Data Format

- 1-byte Command code

• Advanced Security Features

- Block lock protection

The BP3-BP0(16Mb) ; BP2-BP0(8Mb) status bit defines the size of the area to be software protection against

program and erase instructions

- Additional 512 bit secured OTP for unique identifier

• Auto Erase and Auto Program Algorithm

- Automatically erases and verifies data at selected sector

- Automatically programs and verifies data at selected page by an internal algorithm that automatically times the

program pulse widths (Any page to be programed should have page in the erased state first)

P/N: PM1548

REV. 1.2, JUL. 02, 2010

5

Share Link: