ALC5640-VB
Datasheet
Case2: For SPKVDD is from PMIC:
Power On Sequence: (Sequentially turn on power pins)
1. Pull LDO1_EN pin (Pin#44) to DGND (digital ground)
2. DCVDD power supply on (This step is required if DCVDD is supplied by external 1.2V power. This
step and step 7 are exclusive.)
3. DBVDD/AVDD/DACREF/CPVDD=1.8V power supply on
4. DBVDD power supply on (This step is required if DBVDD is supplied higher than 1.8V)
5. MICVDD power supply on (This step is required if MICVDD is supplied by external power)
6. SPKVDD power supply on
7. Pull LDO1_EN pin (Pin#44) to DBVDD (This step is required if DCVDD is generated by internal
LDO. This step and step 2 are exclusive. If DCVDD is supplied by external 1.2V, LDO1_EN must be
pulled low.)
8. Software starts to initialize ALC5640.
Power Off Sequence: (Sequentially turn off power pins)
1. Power down all Codec function (Write 0x0000’h to register MX-00’h)
2. Pull LDO1_EN pin (Pin#44) to DGND (If internal LDO is used to generate DCVDD)
3. SPKVDD power supply off
4. MICVDD power supply off (If MICVDD is supplied by external power)
5. DBVDD power supply on (This step is required if DBVDD is supplied higher than 1.8V)
6. DBVDD/AVDD/DACREF/CPVDD power supply off
7. DCVDD power supply off (If DCVDD is supplied by external power)
Multi-Channel Audio Hub/CODEC and SounzRealTM
13
Digital Sound Effect for Mobile Devices
Rev. 0.91