19-223-Y2G6C-A01-2T 查看數據表（PDF） - EVERLIGHT

零件编号

产品描述 (功能)

生产厂家

19-223-Y2G6C-A01-2T

Chip LED with Bi-Color(Multi-Color)

EVERLIGHT 

19-223/Y2G6C-A01/2T

4.Soldering Iron

Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within

once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering

of each terminal. Be careful because the damage of the product is often started at the time of the hand

solder.

5.Repairing

Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a

double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether

the characteristics of the LEDs will or will not be damaged by repairing.

EVERLIGHT ELECTRONICS CO., LTD.

Office: No 25, Lane 76, Sec 3, Chung Yang Rd,

Tucheng, Taipei 236, Taiwan, R.O.C

Tel: 886-2-2267-2000, 2267-9936

Fax: 886-2267-6244, 2267-6189, 2267-6306

http://www.everlight.com

Everlight Electronics Co., Ltd.

Device No: DSE-000

http://www.everlight.com

Prepared date: 07-Sep-2009

Rev 2

Page: 11 of 11

Prepared by:Xu juan

Share Link: