MSC23B236D-70DS8 查看數據表（PDF） - Oki Electric Industry

零件编号

产品描述 (功能)

生产厂家

MSC23B236D-70DS8

2,097,152-word x 36-bit DYNAMIC RAM MODULE : FAST PAGE MODE TYPE

Oki Electric Industry 

Semiconductor

MSC23B236D

Notes: 1. A start-up delay of 200µs is required after power-up, followed by a minimum of eight initialization cycles

(/RAS only refresh or /CAS before /RAS refresh) before proper device operation is achieved.

2. The AC characteristics assumes tT = 5ns.

3. VIH(Min.) and VIL(Max.) are reference levels for measuring input timing signals. Transition time (tT) are

measured between VIH and VIL.

4. This parameter is measured with a load circuit equivalent to 2TTL loads and 100pF.

5. Operation within the tRCD(Max.) limit ensures that tRAC(Max.) can be met.

tRCD(Max.) is specified as a reference point only. If tRCD is greater than the specified tRCD(Max.) limit, then

the access time is controlled by tCAC.

6. Operation within the tRAD(Max.) limit ensures that tRAC(Max.) can be met.

tRAD(Max.) is specified as a reference point only. If tRAD is greater than the specified tRAD(Max.) limit, then

the access time is controlled by tAA.

7. tOFF(Max.) define the time at which the output achieves the open circuit condition and are not referenced

to output voltage levels.

8. tRCH or tRRH must be satisfied for a read cycle.

Share Link: