LC75366 查看數據表（PDF） - SANYO -> Panasonic

零件编号

产品描述 (功能)

生产厂家

LC75366

Two-Channel Electronic Volume Control

SANYO -> Panasonic 

LC75366, 75366M

Therefore, under such conditions where f = 1 kHz, specifications may be satisfied if C (capacitor) having these

impedances is supplied externally.

The result is that C1 = 893 pF and C2 = 0.9 µF.

Figure 1

Usage Notes

1. The states of the internal analog switches will be indeterminate when power is first applied. Muting should be

applied externally until control data has been transferred and stored.

2. The signal lines for the CL, DI and CE pins should either be covered by the pattern ground or be formed from

shielded cable to prevent the high-frequency digital signals transmitted over these lines from entering the analog

system.

s No products described or contained herein are intended for use in surgical implants, life-support systems, aerospace

equipment, nuclear power control systems, vehicles, disaster/crime-prevention equipment and the like, the failure of

which may directly or indirectly cause injury, death or property loss.

s Anyone purchasing any products described or contained herein for an above-mentioned use shall:

ΠAccept full responsibility and indemnify and defend SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and

distributors and all their officers and employees, jointly and severally, against any and all claims and litigation and all

damages, cost and expenses associated with such use:

 Not impose any responsibility for any fault or negligence which may be cited in any such claim or litigation on

SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors or any of their officers and employees

jointly or severally.

s Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for

volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied

regarding its use or any infringements of intellectual property rights or other rights of third parties.

This catalog provides information as of November, 1997. Specifications and information herein are subject to

change without notice.

No. 4929-11/11

Share Link: