22RIA20 查看數據表（PDF） - International Rectifier
零件编号
产品描述 (功能)
生产厂家
22RIA20 Datasheet PDF : 9 Pages
| |||
22RIA Series
Bulletin I2403 rev. A 07/00
Switching
Parameter
22RIA
Units Conditions
di/dt
Max. rate of rise of turned-on
current
VDRM ≤ 600V
VDRM ≤ 800V
VDRM ≤ 1000V
TJ = TJ max., VDM = rated VDRM
200
A/µs Gate pulse = 20V, 15Ω, tp = 6µs, tr = 0.1µs max.
180
ITM = (2x rated di/dt) A
160
VDRM ≤ 1600V
150
tgt
Typical turn-on time
trr
Typical reverse recovery time
tq
Typical turn-off time
0.9
TJ = 25°C,
at = rated VDRM/VRRM, TJ = 125°C
4
µs TJ = TJ max.,
ITM = IT(AV), tp > 200µs, di/dt = -10A/µs
110
TJ = TJ max., ITM = IT(AV), tp > 200µs, VR = 100V,
di/dt = -10A/µs, dv/dt = 20V/µs linear to
67% VDRM, gate bias 0V-100W
(*) tq = 10µsup to 600V, tq = 30µs up to 1600V available on special request.
Blocking
Parameter
22RIA
Units Conditions
dv/dt Max. critical rate of rise of
off-state voltage
100
300 (*)
V/µs
TJ = TJ max. linear to 100% rated VDRM
TJ = TJ max. linear to 67% rated VDRM
(**) Available with: dv/dt = 1000V/µs, to complete code add S90 i.e. 22RIA160S90.
Triggering
Parameter
PGM Maximum peak gate power
PG(AV) Maximum average gate power
IGM Max. peak positive gate current
-VGM Maximum peak negative
gate voltage
IGT
DC gate current required
to trigger
VGT DC gate voltage required
to trigger
IGD DC gate current not to trigger
VGD DC gate voltage not to trigger
22RIA
8.0
2.0
1.5
10
90
60
35
3.0
2.0
1.0
2.0
0.2
Units Conditions
W
TJ = TJ max.
A TJ = TJ max.
V TJ = TJ max.
TJ = - 65°C
mA TJ = 25°C
TJ = 125°C
Max. required gate trigger current/
voltage are the lowest value which
will trigger all units 6V anode-to-
cathode applied
TJ = - 65°C
V TJ = 25°C
V TJ = 125°C
mA TJ = TJ max., VDRM = rated value
V TJ = TJ max.
Max. gate current/ voltage not to
trigger is the max. value which
VDRM = rated value
will not trigger any unit with rated
VDRM anode-to-cathode applied
www.irf.com
3
Share Link: 