DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

28F016XD-85 查看數據表(PDF) - Intel

零件编号
产品描述 (功能)
生产厂家
28F016XD-85 Datasheet PDF : 54 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
28F016XD FLASH MEMORY
E
Number
-001
-002
-003
-004
REVISION HISTORY
Description
Original Version
Removed support of the following features:
All page buffer operations (read, write, programming, Upload Device Information)
Command queuing
Software Sleep and Abort
Erase All Unlocked Blocks
Device Configuration command
Changed definition of “NC.” Removed “No internal connection to die” from description.
Added “xx” to Upper Byte of Command (Data) Definition in Sections 4.2 and 4.3.
Modified parameters “V” and “I” of Section 5.1 to apply to “NC” pins.
Increased IPPS (VPP Read Current) for VPP > VCC to 200 µA at VCC = 3.3V/5.0V.
Changed VCC = 5.0V DC Characteristics (Section 5.5) marked with Note 1 to indicate
that these currents are specified for a CMOS rise/fall time (10% to 90%) of <5 ns
and a TTL rise/fall time of <10 ns.
Corrected “RP# high to RAS# going low” to be a “Min” specification at VCC = 3.3V/5.0V.
Increased Typical “Word/Block Program Times” (tWHRH1/tWHRH3) for VPP = 5.0V:
tWHRH1 from 24.0 µs to 35.0 µs and tWHRH3 from 0.8 sec to 1.2 sec at VCC = 3.3V
tWHRH1 from 16.0 µs to 25.0 µs and tWHRH3 from 0.6 sec to 0.85 sec at VCC = 5.0V
Changed “Time from Erase Suspend Command to WSM Ready” spec name to “Erase
Suspend Latency Time to Read;” modified typical values and added Min/Max
values at VCC =3.3/5.0V and VPP =5.0/12.0V (Section 5.10).
Minor cosmetic changes throughout document.
Added 3/5# pin to Pinout Configuration (Figure 2), Product Overview (Section 1.1) and
Lead Descriptions (Section 2.1)
Modified Block Diagram (Figure 1): Removed Address/Data Queues, Page Buffers, and
Address Counter; Added 3/5# pin
Added 3/5# pin to Test Conditions of ICC2 and ICC5 Specifications
Modified Power-Up and Reset Timings (Section 5.9) to include 3/5# pin: Removed t5VPH
and t3VPH specifications; Added tPLYL, tPLYH, tYLPH, and tYHPH specifications
Corrected TSOP Mechanical Specification A1 from 0.50 mm to 0.050 mm (Section 6.0)
Minor cosmetic changes throughout document.
Updated DC Specifications ICC3, ICC4, ICC6, ICC7, ICCD and IPPES
Updated AC Specifications tCAS(min), tRCD(max) and tCWD(min)
4

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]