JAN2N6901 查看數據表（PDF） - Microsemi Corporation
零件编号
产品描述 (功能)
生产厂家
JAN2N6901 Datasheet PDF : 3 Pages
| |||
6 Lake Street, Lawrence, MA 01841
1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803
Website: http://www.microsemi.com
TECHNICAL DATA SHEET
Gort Road Business Park, Ennis, Co. Clare, Ireland
Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298
PACKAGE DIMENSIONS
Dimensions
Symbol Inches
Millimeters
Min Max Min Max
CD .305 .335 7.75 8.51
CH .160 .180 4.07 4.57
HD .335 .370 8.51 9.40
LC
.200 TP
5.08 TP
LD .016 .021 0.41 0.53 8,9
LL .500 .750 12.70 19.05 8,9
LU .016 .019 0.41 0.48 8,9
L1
.050
1.27 8,9
L2 .250
6.35
8,9
P .100
2.54
6
Q
.050
1.27 5
TL .029 .045 0.74 1.14 4
TW .028 .034 0.71 0.86 3
r
.010
0.25 10
α
45° TP
45° TP
6
NOTE:
1. Dimensions are in inches.
2. Millimeters are given for general information only.
3. Beyond radius(r) maximum, TW shall be held for a minimum length of .011 (0.28 mm).
4. Dimension TL measured from maximum HD.
5. Outline in this zone is not controlled.
6. Dimension CD shall not vary more than .010 (0.25 mm) in zone P. This zone is controlled for automatic handling.
7. Leads at gauge plane .054 +.001, -.000 (1.37 +0.03, -0.00 mm) below seating plane shall be within .007 (0.18 mm) radius
of true position (TP) at maximum material condition (MMC) relative to tab at MMC.
8. LU applies between L1 and L2. LD applies between L2 and LL minimum. Diameter is uncontrolled in L1 and beyond
LL minimum.
9. All three leads.
10. Radius(r) applies to both inside corners of tab.
11. Drain is electrically connected to the case.
12. Pin out: 1- source, 2 - gate, 3 - drain (case).
13. In accordance with ASME Y14.5M, diameters are equivalent to φx symbology.
FIGURE 1. Physical dimensions for TO-205 AF
T4-LDS-0188 Rev. 1 (101985)
Page 3 of 3
Share Link: 