DSP56F801 查看數據表（PDF） - Motorola => Freescale

零件编号

产品描述 (功能)

生产厂家

DSP56F801

16-bit Hybrid Controller

Motorola => Freescale 

Freescale Semiconductor, Inc.

Part 1 Overview

1.1 56F801 Features

1.1.1 Digital Signal Processing Core

• Efficient 16-bit 56800 family hybrid controller engine with dual Harvard architecture

• As many as 40 Million Instructions Per Second (MIPS) at 80MHz core frequency

• Single-cycle 16 × 16-bit parallel Multiplier-Accumulator (MAC)

• Two 36-bit accumulators including extension bits

• 16-bit bidirectional barrel shifter

• Parallel instruction set with unique DSP addressing modes

• Hardware DO and REP loops

• Three internal address buses and one external address bus

• Four internal data buses and one external data bus

• Instruction set supports both DSP and controller functions

• Controller style addressing modes and instructions for compact code

• Efficient C compiler and local variable support

• Software subroutine and interrupt stack with depth limited only by memory

• JTAG/OnCE debug programming interface

1.1.2 Memory

• Harvard architecture permits as many as three simultaneous accesses to Program and Data memory

• On-chip memory including a low-cost, high-volume Flash solution

— 8K × 16 bit words of Program Flash

— 1K × 16-bit words of Program RAM

— 2K × 16-bit words of Data Flash

— 1K × 16-bit words of Data RAM

— 2K × 16-bit words of Boot Flash

• Programmable Boot Flash supports customized boot code and field upgrades of stored code

through a variety of interfaces (JTAG, SPI)

1.1.3 Peripheral Circuits for 56F801

• Pulse Width Modulator (PWM) with six PWM outputs, two Fault inputs, fault-tolerant design with

deadtime insertion; supports both center- and edge-aligned modes

• Two 12-bit, Analog-to-Digital Converters (ADCs), which support two simultaneous conversions

with two 4-multiplexed inputs; ADC and PWM modules can be synchronized

• General Purpose Quad Timer: Timer D with three pins (or three additional GPIO lines)

• Serial Communication Interface (SCI) with two pins (or two additional GPIO lines)

• Serial Peripheral Interface (SPI) with configurable four-pin port (or four additional GPIO lines)

2

56F801 Technical Data

For More Information On This Product,

Go to: www.freescale.com

Share Link: