DSP56F827FG80 查看數據表（PDF） - Motorola => Freescale

零件编号

产品描述 (功能)

生产厂家

DSP56F827FG80

16-bit Hybrid Controller

Motorola => Freescale 

Freescale Semiconductor, Inc.

56F827 Description

• One Synchronous Serial Interface with 6 pins (or 6 additional GPIO pins)

• One 8-channel Programmable Chip Select

• Sixteen dedicated and forty eight multiplexed GPIO pins (64 total)

• Computer-Operating Properly (COP) Watchdog timer

• Two external interrupt pins

• External reset pin for hardware reset

• JTAG/On-Chip Emulation (OnCE™) for unobtrusive, processor speed-independent debugging

• Software-programmable, Phase Locked Loop-based frequency synthesizer for the core clock

• Fabricated in high-density CMOS with 5V-tolerant, TTL-compatible digital inputs

• One Time of Day (TOD) Timer

1.1.4 Power Information

• Dual power supply, 3.3V and 2.5V

• Wait and Multiple Stop modes available

1.2 56F827 Description

The 56F827 is a member of the 56800 core-based family of hybrid controllers. It combines, on a single

chip, the processing power of a DSP and the functionality of a microcontroller with a flexible set of

peripherals to create an extremely cost-effective solution for general purpose applications. Because of its

low cost, configuration flexibility, and compact program code, the 56F827 is well-suited for many

applications. The 56F827 includes many peripherals that are especially useful for applications such as:

noise suppression, ID tag readers, sonic/subsonic detectors, security access devices, remote metering,

sonic alarms, and telephony.

The 56800 core is based on a Harvard-style architecture consisting of three execution units operating in

parallel, allowing as many as six operations per instruction cycle. The microprocessor-style programming

model and optimized instruction set allow straightforward generation of efficient, compact code for both

DSP and MCU applications. The instruction set is also highly efficient for C/C++ Compilers to enable rapid

development of optimized control applications.

The 56F827 supports program execution from either internal or external memories. Two data operands can

be accessed from the on-chip Data RAM per instruction cycle. The 56F827 also provides two external

dedicated interrupt lines, and up to 64 General Purpose Input/Output (GPIO) lines, depending on peripheral

configuration.

The 56F827 controller includes 64K words (16-bit) of Program Flash and 4K words of Data Flash (each

programmable through the JTAG port) with 1K words of Program RAM and 4K words of Data RAM. It

also supports program execution from external memory. The 56800 core is capable of accessing two data

operands from the on-chip Data RAM per instruction cycle.

This controller also provides a full set of standard programmable peripherals that include one 10-input, 12-

bit Analog-to-Digital Converters (ADC), one Synchronous Serial Interface (SSI), two Serial Peripheral

Interfaces (SPI), three Serial Communications Interfaces (SCI). (Note: The second SPI is multiplexed with

the second and third SCIs, giving the option to select a second SPI or two additional SCIs.) This hybrid

controller also provides one Programmable Chip Select (PCS), and one Quad Timer. The SCI, SSI, SPI,

Quad Timer A, and select address and data lines can be used as General Purpose Input/Outputs (GPIOs) if

those functions are not required.

56F827 Technical Data

3

For More Information On This Product,

Go to: www.freescale.com

Share Link: