56F801E 查看數據表（PDF） - Freescale Semiconductor

零件编号

产品描述 (功能)

生产厂家

56F801E

16-bit Digital Signal Controllers

Freescale Semiconductor 

A key application-specific feature of the 56F801 is the inclusion of a Pulse Width Modulator (PWM)

module. This modules incorporates six complementary, individually programmable PWM signal outputs

to enhance motor control functionality. Complementary operation permits programmable dead-time

insertion, and separate top and bottom output polarity control. The up-counter value is programmable to

support a continuously variable PWM frequency. Both edge- and center-aligned synchronous pulse width

control (0% to 100% modulation) are supported. The device is capable of controlling most motor types:

ACIM (AC Induction Motors), both BDC and BLDC (Brush and Brushless DC motors), SRM and VRM

(Switched and Variable Reluctance Motors), and stepper motors. The PWMs incorporate fault protection

and cycle-by-cycle current limiting with sufficient output drive capability to directly drive standard

opto-isolators. A “smoke-inhibit”, write-once protection feature for key parameters is also included. The

PWM is double-buffered and includes interrupt control to permit integral reload rates to be programmable

from 1 to 16. The PWM modules provide a reference output to synchronize the Analog-to-Digital

Converters.

The 56F801 incorporates an 8 input, 12-bit Analog-to-Digital Converter (ADC). A full set of standard

programmable peripherals is provided that include a Serial Communications Interface (SCI), a Serial

Peripheral Interface (SPI), and two Quad Timers. Any of these interfaces can be used as General-Purpose

Input/Outputs (GPIO) if that function is not required. An on-chip relaxation oscillator provides flexibility

in the choice of either on-chip or externally supplied frequency reference for chip timing operations.

Application code is used to select which source is to be used.

1.3 State of the Art Development Environment

• Processor ExpertTM (PE) provides a Rapid Application Design (RAD) tool that combines easy-to-use

component-based software application creation with an expert knowledge system.

• The Code Warrior Integrated Development Environment is a sophisticated tool for code navigation,

compiling, and debugging. A complete set of evaluation modules (EVMs) and development system cards

will support concurrent engineering. Together, PE, Code Warrior and EVMs create a complete, scalable

tools solution for easy, fast, and efficient development.

56F801 Technical Data, Rev. 17

6

Freescale Semiconductor

Share Link: