DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

WEDPND16M72S-250BM 查看數據表(PDF) - White Electronic Designs => Micro Semi

零件编号
产品描述 (功能)
生产厂家
WEDPND16M72S-250BM
White-Electronic
White Electronic Designs => Micro Semi White-Electronic
WEDPND16M72S-250BM Datasheet PDF : 15 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
White Electronic Designs WEDPND16M72S-XBX
ABSOLUTE MAXIMUM RATINGS
CAPACITANCE (NOTE 2)
Parameter
Voltage on VCC, VCCQ Supply relative to Vss
Voltage on I/O pins relative to Vss
Operating Temperature TA (Mil)
Operating Temperature TA (Ind)
Storage Temperature, Plastic
-1 to 3.6
-1 to 3.6
-55 to +125
-40 to +85
-55 to +150
Unit
V
V
°C
°C
°C
Parameter
Input Capacitance: CLK
Addresses, BA0-1 Input Capacitance
Input Capacitance: All other input-only pins
Input/Output Capacitance: I/Os
Symbol Max
CI1
8
CA
30
CI2
9
CIO
12
Unit
pF
pF
pF
pF
NOTE:
Stress greater than those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress rating only and functional operation
of the device at these or any other conditions greater than those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum
rating conditions for extended periods may affect reliability.
DC ELECTRICAL CHARACTERISTICS AND OPERATING CONDITIONS (NOTES 1, 6)
(VCC = +2.5V ±0.2V; TA = -55°C TO +125°C)
Parameter/Condition
Supply Voltage
Symbol
Min
VCC
2.3
Units
Max
2.7
V
I/O Supply Voltage
VCCQ
2.3
2.7
V
Input High Voltage: Logic 1; All inputs (21)
VIH
VREF - 0.04
VREF + 0.04
V
Input Low Voltage: Logic 0; All inputs (21)
VIL
Input Leakage Current: Any input 0V £ VIN £ VCC (All other pins not under test = 0V)
II
-0.3
VREF - 0.15
V
-2
2
µA
Input Leakage Address Current (All other pins not under test = 0V)
Output Leakage Current: I/Os are disabled; 0V £ VOUT £ VCC
II
-10
IOZ
-5
10
µA
5
µA
Output Levels: Full drive option - x4, x8, x16
High Current (VOUT = VCCQ - 0.373V, minimum VREF, minimum VTT)
Low Current (VOUT = 0.373V, maximum VREF, maximum VTT)
IOH
-16.8
IOL
16.8
-
mA
-
mA
Output Levels: Reduced drive option - x16 only
High Current (VOUT = VCCQ - 0.763V, minimum VREF, minimum VTT)
Low Current (VOUT = 0.763V, maximum VREF, maximum VTT)
IOHR
-9
IOLR
9
-
mA
-
mA
I/O Reference Voltage
VREF
0.49 x VCCQ
0.51 x VCCQ
V
I/O Termination Voltage
VTT
VREF - 0.04
VREF + 0.04
V
ICC SPECIFICATIONS AND CONDITIONS (NOTES 1-5, 10, 12, 14)
(VCC = +2.5V ±0.2V; TA = -55°C TO +125°C)
MAX
Parameter/Condition
OPERATING CURRENT: One bank; Active-Precharge; tRC = tRC (MIN); tCK = tCK (MIN); DQ, DM, and DQS inputs
changing once per clock cyle; Address and control inputs changing once every two clock cycles; (22, 48)
OPERATING CURRENT: One bank; Active-Read-Precharge; Burst = 2; tRC = tRC (MIN); tCK = tCK (MIN);
IOUT = 0mA; Address and control inputs changing once per clock cycle (22, 48)
PRECHARGE POWER-DOWN STANDBY CURRENT: All banks idle; Power-down mode; tCK = tCK (MIN);
CKE = LOW; (23, 32, 50)
IDLE STANDBY CURRENT: CS = HIGH; All banks idle; tCK = tCK (MIN); CKE = HIGH; Address and other control
inputs changing once per clock cycle. VIN = VREF for DQ, DQS, and DM (51)
ACTIVE POWER-DOWN STANDBY CURRENT: One bank active; Power-down mode; tCK = tCK (MIN);
CKE = LOW (23, 32, 50)
ACTIVE STANDBY CURRENT: CS = HIGH; CKE = HIGH; One bank; Active-Precharge; tRC = tRAS (MAX);
tCK = tCK (MIN); DQ, DM, and DQS inputs changing twice per clock cycle; Address and other control
inputs changing once per clock cycle (22)
OPERATING CURRENT: Burst = 2; Reads; Continuous burst; One bank active; Address and control inputs
changing once per clock cycle; tCK = tCK (MIN); IOUT = 0mA (22, 48)
OPERATING CURRENT: Burst = 2; Writes; Continuous burst; One bank active; Address and control inputs
changing once per clock cycle; tCK = tCK (MIN); DQ, DM, and DQS inputs changing twice per clock cycle (22)
AUTO REFRESH CURRENT
tRC = tRC (MIN) (27, 50)
tRC = 7.8125µs (27, 50)
SELF REFRESH CURRENT: CKE £ 0.2V
Standard (11)
OPERATING CURRENT: Four bank interleaving READs (BL=4) with auto precharge, tRC =tRC (MIN); tCK = tCK (MIN);
Address and control inputs change only during Active READ or WRITE commands. (22, 49)
250MHz
Symbol 266MHz 200MHz Units
IDD0
600
575
mA
IDD1
825
775
mA
IDD2P
20
20
mA
IDD2F
200
200
mA
IDD3P
150
125
mA
IDD3N
225
200
mA
IDD4R
IDD4W
IDD5
IDD5A
IDD6
IDD7
1250 1075 mA
1250
950
mA
1225 1075 mA
30
30
mA
20
20
mA
2000 1875 mA
White Electronic Designs Corporation • Phoenix AZ • (602) 437-1520
10

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]