ILX522K
Electrical Characteristics (Note 1)
(Ta = 25°C, VDD1 = 9V, VDD2 = 5V fφRS = 3.5MHz Light source = 3200K, IR cut filter CM-500S (t = 1.0mm))
Item
Sensitivity
Sensitivity nonuniformity
Saturation output voltage
Dark voltage average
Dark signal nonuniformity
Image lag
9V supply current
5V supply current
Total transfer efficiency
Output impedance
Offset level
Red
Green
Blue
Green
Red/Blue
Green
Red/Blue
Symbol Min.
RR
5.2
RG
6.5
RB
2.8
PRNU
—
VSAT
1.0
VDRK-G
—
VDRK-R/B
—
DSNU-G —
DSNU-R/B —
IL
—
IVDD1
—
IVDD2
—
TTE
92.0
ZO
—
VOS
—
Typ.
8.0
10.0
4.3
5.0
1.5
0.3
1.5
0.6
2.0
0.02
20
16.0
98.0
150
5.4
Max. Unit Remarks
10.8
13.5 V/(lx · s) Note 2
5.8
15.0
%
Note 3
—
V
Note 4
1.5
9.0
mV Note 5
3.0
12.0
—
%
Note 6
40
mA
—
32.0 mA
—
—
%
—
—
Ω
—
—
V
Note 7
Note:
1) In accordance with the given electrooptical characteristics, the black level is defined as the average of D3,
D4, to D10.
2) For the sensitivity test light is applied with a uniform intensity of illumination.
3) PRNU is defined as indicated below in each color. Ray incidence conditions are the same as for Note 2.
(VMAX – VMIN)/2
PRNU =
VAVE
× 100 [%]
The maximum output of each color is set to VMAX, the minimum output to VMIN, and the average output to
VAVE.
4) Use below the minimum value of the saturation output voltage.
5) Optical signal accumulated time τint stands at 5ms.
6) VOUT-G = 500mV (Typ.)
7) VOS is defined as indicated below.
VOUT∗
VOS
GND
∗ VOUT indicates VOUT-G and VOUT-R/B.
–3–