DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

7545 查看數據表(PDF) - Renesas Electronics

零件编号
产品描述 (功能)
生产厂家
7545
Renesas
Renesas Electronics Renesas
7545 Datasheet PDF : 62 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
7545 Group
PIN DESCRIPTION
Table 3 Pin description
Pin
VCC, VSS
VDDR
CNVSS
RESET
XIN
XOUT
P00/KEY0
P07/KEY7
P10, P11
P20(LED0)/INT0
P21(LED1)/INT1
P22(LED2)
P27(LED7)
P30P37
P40(LED8),
P41(LED9)
P42/CARR
Name
Power source
Power source
CNVSS
Reset I/O
Clock input
Clock output
I/O port P0
I/O port P1
I/O port P2
I/O port P3
I/O port P4
Function
Function expect a port function
• Apply voltage of 1.8 to 3.6V to VCC, and 0 V to VSS.
• Power source pin only for RAM2. When this pin is used, connect an approximately 0.1 µF
bypass capacitor across the VSS line and the VDDR line. When not used, connect it to VSS.
• Chip operating mode control pin, which is always connected to Vss.
• An N-channel open-drain I/O pin for a system reset. This pin has a pull-up transistor. When the
watchdog timer, the built-in power-on reset or the voltage drop detection circuit causes the
system to be reset, the RESET pin outputs "L" level.
• Input and output pins for main clock generating circuit
• Connect a ceramic resonator or quartz-crystal oscillator between the XIN and XOUT pins.
• 8-bit I/O port.
• I/O direction register allows each pin to be individually
programmed as either input or output.
• CMOS compatible input level
• CMOS 3-state output structure
• Whether the pull-up function/key-on wakeup function
is to be used or not can be determined by program.
• Key-input (key-on wake up interrupt
input) pins
• 2-bit I/O port having almost the same function as P0.
• CMOS compatible input level
• The output structure can be switched to N-channel
open-drain or CMOS by software.
Note: RLSS-only pins
• 8-bit I/O port having almost the same function as P0.
• CMOS compatible input level
• The output structure can be switched to N-channel
open-drain or CMOS by software.
• P2 can output a large current for driving LED.
• Interrupt input pins
• 8-bit I/O port
• I/O direction register allows each pin to be individually programmed as either input or output.
• CMOS compatible input level
• The output structure can be switched to N-channel open-drain or CMOS by software.
• 2-bit I/O port having almost the same function as P0. Note: RLSS-only pins
• CMOS compatible input level
• CMOS 3-state output structure
• 1-bit I/O port
• CMOS compatible input level
• CMOS 3-state output structure
• Carrier wave output pin for remote-
control transmit
Rev.1.06 Mar 07, 2008 Page 7 of 59
REJ03B0140-0106

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]