RP20-2412SF 查看數據表（PDF） - RECOM Electronic GmbH
零件编号
产品描述 (功能)
生产厂家
RP20-2412SF Datasheet PDF : 4 Pages
| |||
POWERLINE
DC/DC-Converter
RP20-S_DF
Series
Specifications (typical at nominal input and 25°C unless otherwise noted)
Minimum Load (see Note 1)
Single
Dual
0%
10% of FL
Line Regulation (LL-HL at full load)
±0.2%
Load Regulation (25% to 100% FL)
±0.5%
Cross Regulation (asymmetrical load 25%/100% FL)
Ripple and Noise (20MHz bandwith)
(Measured with a 1004pF/50V MLCC)
Dual
Single 1.5, 1.8, 2.5, 3.3V
Single 5, 12, 15V
Dual 5, 12, 15V
±5%
60mVp-p
75mVp-p
100mVp-p
Temperature Coefficient
±0.02%/°C, max.
Transient Response (25% load step change)
Over Voltage Protection
Zener diode clamp (only single)
1.5, 1.8, 2.5, 3.3V
5V
12V
15V
500µS
3.9V
6.2V
15V
18V
Over Load Protection (% of full load at nominal Vin)
150% typ
Short Circuit Protection
Hiccup, automatic recovery
Efficiency
Isolation Voltage
Input to Output
Input (Output) to case
see „Selection Guide“ table
1.600VDC min.
1.600VDC min.
Isolation Resistance
109 Ω min.
Isolation Capacitance
1000pF max.
Operating Frequency
500kHz typ.
Operating Temperature Range
-40°C to +85°C(with derating)
Maximum Case Temperature
+100°C
Storage Temperature Range
Thermal Impedance
Natural convection
Natural convection with Heat Sink
-55°C to +105°C
12°C/Watt
10°C/Watt
Thermal Shock
MIL-STD-810D
Vibration
10-55Hz, 2G, 30 Min. along X, Y and Z
Relative Humidity
5% to 95% RH
Case Material
Nickel-Coated copper
Base Material
Non-conductive black plastic
Potting Material
Conducted Emissions
Radiated Emissions
ESD
Radiated Immunity
Fast Transient
Surge
Conducted Immunity
EN55022
EN55022
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
Epoxy (UL94-V0)
Class A
Class A
Perf. Criteria 2
Perf. Criteria 2
Perf. Criteria 2
Perf. Criteria 2
Perf. Criteria 2
Weight
27g
Dimensions
50.8 x 25.4 x 10.2mm
MTBF (see note 2)
1.791 x 106 Hours
238
April-2005
www.recom-international.com
Share Link: 