ACPL-332J-500E 查看數據表（PDF） - Avago Technologies

零件编号

产品描述 (功能)

生产厂家

ACPL-332J-500E

2.5 Amp Output Current IGBT Gate Driver Optocoupler with Integrated (VCE) Desaturation Detection, UVLO Fault Status Feedback and Active Miller Clamping

Avago Technologies 

Regulatory Information

The ACPL-332J is approved by the following organizations:

IEC/EN/DIN EN 60747-5-2

Approval under:

IEC 60747-5-2 :1997 + A1:2002

EN 60747-5-2:2001 + A1:2002

DIN EN 60747-5-2 (VDE 0884 Teil 2):2003-01

UL

Approval under UL 1577, component recognition

program up to VISO = 3750 VRMS. File E55361.

CSA

Approval under CSA Component Acceptance Notice #5,

File CA 88324.

Table 1. IEC/EN/DIN EN 60747-5-2 Insulation Characteristics*

Description

Installation classification per DIN VDE 0110/1.89, Table 1

for rated mains voltage ≤ 150 Vrms

for rated mains voltage ≤ 300 Vrms

for rated mains voltage ≤ 600 Vrms

Climatic Classification

Pollution Degree (DIN VDE 0110/1.89)

Maximum Working Insulation Voltage

Input to Output Test Voltage, Method b**,

VIORM x 1.875=VPR, 100% Production Test with tm=1 sec, Partial discharge < 5 pC

Input to Output Test Voltage, Method a**,

VIORM x 1.5=VPR, Type and Sample Test, tm=60 sec, Partial discharge < 5 pC

Highest Allowable Overvoltage (Transient Overvoltage tini = 10 sec)

Safety-limiting values – maximum values allowed in the event of a failure.

Case Temperature

Input Current

Output Power

Insulation Resistance at TS, VIO = 500 V

Symbol

VIORM

VPR

VPR

VIOTM

Characteristic

I – IV

I – IV

I – III

55/100/21

2

891

1670

1336

6000

TS

IS, INPUT

PS, OUTPUT

RS

175

400

1200

>109

Unit

Vpeak

Vpeak

Vpeak

Vpeak

°C

mA

mW

W

* Isolation characteristics are guaranteed only within the safety maximum ratings which must be ensured by protective circuits in application.

Surface mount classification is class A in accordance with CECCOO802.

** Refer to the optocoupler section of the Isolation and Control Components Designer’s Catalog, under Product Safety Regulations section IEC/EN/

DIN EN 60747-5-2, for a detailed description of Method a and Method b partial discharge test profiles.

Dependence of Safety Limiting Values on Temperature. (take from DS AV01-0579EN Pg.7)



Share Link: