ACPL-796J-560E 查看數據表（PDF） - Avago Technologies
零件编号
产品描述 (功能)
生产厂家
ACPL-796J-560E Datasheet PDF : 16 Pages
| |||
Recommended Pb-Free IR Profile
Recommended reflow condition as per JEDEC Standard, J-STD-020 (latest revision). Non-Halide Flux should be used.
Regulatory Information
The ACPL-796J is approved by the following organizations:
IEC/EN/DIN EN 60747-5-5
Approval under: DIN EN 60747-5-5 (VDE 0884-5):2011-11 EN 60747-5-5:2011
UL
Approval under UL 1577, component recognition program up to VISO = 5000 VRMS. File E55361.
CSA
Approval under CSA Component Acceptance Notice #5, File CA 88324.
Table 3. IEC/EN/DIN EN 60747-5-5 Insulation Characteristics [1]
Description
Symbol
Value
Units
Installation classification per DIN VDE 0110/1.89, Table 1
for rated mains voltage ≤ 150 Vrms
I-IV
for rated mains voltage ≤ 300 Vrms
I-IV
for rated mains voltage ≤ 450 V rms
I-IV
for rated mains voltage ≤ 600 Vrms
I-IV
for rated mains voltage ≤ 1000 Vrms
I-III
Climatic Classification
55/105/21
Pollution Degree (DIN VDE 0110/1.89)
Maximum Working Insulation Voltage
Input to Output Test Voltage, Method b
VIORM × 1.875 = VPR, 100% Production Test with tm = 1 sec,
Partial Discharge < 5 pC
Input to Output Test Voltage, Method a
VIORM × 1.6 = VPR, Type and Sample Test, tm = 10 sec,
Partial Discharge < 5 pC
VIORM
VPR
VPR
2
1414
2652
2262
Vpeak
Vpeak
Vpeak
Highest Allowable Overvoltage (Transient Overvoltage, tini = 60 sec)
VIOTM
8000
Vpeak
Safety-limiting values (Maximum values allowed in the event of a failure)
Case Temperature
Input Current[2]
Output Power[2]
TS
175
°C
IS,INPUT
400
mA
PS,OUTPUT
600
mW
Insulation Resistance at TS, VIO = 500 V
RS
≥ 109
Notes:
1. Insulation characteristics are guaranteed only within the safety maximum ratings, which must be ensured by protective circuits within the
application.
2. Safety-limiting parameters are dependent on ambient temperature. Refer to the following figure for dependence of PS and IS on ambient
temperature.
800
700
PS (mW)
IS (mA)
600
500
400
300
200
100
0
0 25 50 75 100 125 150 175 200
TS - CASE TEMPERATURE - oC
Figure 4.
4
Share Link: 