ACPL-M43T 查看數據表（PDF） - Avago Technologies

零件编号

产品描述 (功能)

生产厂家

ACPL-M43T

Wide Operating Temperature Automotive Digital Optocoupler with R2Coupler™ Isolation and 5-Pin SMT Package

Avago Technologies 

Recommended reflow condition as per JEDEC Standard, J-STD-020 (latest revision).

Note: Non-halide flux should be used.

Regulatory Information

The ACPL-M43T is approved by the following organizations:

UL

IEC/EN/DIN EN 60747-5-2

Approved under UL 1577, component recognition pro-

gram up to VISO = 4000 VRMS

CSA

Approved under CSA Component Acceptance Notice #5.

Approved under:

IEC 60747-5-5:2007

EN 60747-5-2:2001 + A1

DIN EN 60747-5-2 (VDE 0884 Teil 2)

IEC/EN/DIN EN 60747-5-2 Insulation Characteristics*

Description

Symbol

Characteristic Unit

Installation classification per DIN VDE 0110/1.89, Table 1

for rated mains voltage ≤ 150 Vrms

for rated mains voltage ≤ 300 Vrms

for rated mains voltage ≤ 600 Vrms

I – IV

I – III

I – II

Climatic Classification

55/125/21

Pollution Degree (DIN VDE 0110/1.89)

2

Maximum Working Insulation Voltage

VIORM

567

Vpeak

Input to Output Test Voltage, Method b*

VPR

VIORM x 1.875=VPR, 100% Production Test with tm=1 sec, Partial discharge < 5 pC

1063

Vpeak

Input to Output Test Voltage, Method a*

VIORM x 1.6=VPR, Type and Sample Test, tm=10 sec, Partial discharge < 5 pC

VPR

907

Vpeak

Highest Allowable Overvoltage (Transient Overvoltage tini = 60 sec)

VIOTM

6000

Vpeak

Safety-limiting values – maximum values allowed in the event of a failure.

Case Temperature

Input Current

Output Power

TS

175

°C

IS, INPUT

230

mA

PS, OUTPUT 600

mW

Insulation Resistance at TS, VIO = 500 V

RS

>109



* Refer to the optocoupler section of the Isolation and Control Components Designer’s Catalog, under Product Safety Regulations section, (IEC/EN/

DIN EN 60747-5-2) for a detailed description of Method a and Method b partial discharge test profiles.

Insulation and Safety Related Specifications

Parameter

Symbol ACPL-M43T Units

Minimum External

L(101)

5

mm

Air Gap (Clearance)

Minimum External

L(102)

5

mm

Tracking (Creepage)

Minimum Internal

Plastic Gap

(Internal Clearance)

0.08

mm

Tracking Resistance

CTI

175

V

(Comparative

Tracking Index)

Isolation Group

IIIa

(DIN VDE0109)

Conditions

Measured from input terminals to output

terminals, shortest distance through air.

Measured from input terminals to output

terminals, shortest distance path along body.

Through insulation distance conductor to

conductor, usually the straight line distance

thickness between the emitter and detector.

DIN IEC 112/VDE 0303 Part 1

Material Group (DIN VDE 0109)

3

Share Link: