ACPL-M49T-000E 查看數據表（PDF） - Avago Technologies

零件编号

产品描述 (功能)

生产厂家

ACPL-M49T-000E

Wide Operating Temperature Automotive R2Coupler™ 20kBd Digital Optocoupler Confi gurable as Low Power, Low Leakage Phototransistor

Avago Technologies 

Package Characteristics

*The Input-Output Momentary Withstand Voltage is a dielectric voltage rating that should not be interpreted as an

input-output continuous voltage rating.

Parameter

Symbol Min. Typ. Max. Units Test Conditions

Fig. Note

Input-Output Momentary VISO

4000

VRMS RH ≤ 50%, t = 1 min;

6, 7

Withstand Voltage*

TA = 25°C

Input-Output Resistance RI-O

1014



VI-O = 500 VDC

6

Input-Output Capacitance CI-O

0.6

pF

f = 1 MHz; VI-O = 0 VDC

6

Notes:

1. Derate linearly above 85°C free-air temperature at a rate of 0.25mA/°C.

2. Derate linearly above 85°C free-air temperature at a rate of 0.30mA/°C.

3. Derate linearly above 85°C free-air temperature at a rate of 0.375mW/°C.

4. Derate linearly above 85°C free-air temperature at a rate of 1.875mW/°C.

5. Current Transfer Ratio in percent is defined as the ratio of output collector current, IO, to the forward LED input current, IF, times 100.

6. Device considered a two terminal device: pins 1 and 3 shorted together, and pins 4,5,and 6 shorted together.

7. In accordance with UL 1577, each optocoupler is proof tested by applying an insulation test voltage > 4800VRMS for 1 second.

8. This is in a 4-pin configuration where the VCC and VO pin are shorted together.

9. Common transient immunity in a Logic High level is the maximum tolerable (positive) dVCM/dt on the rising edge of the common mode pulse, VCM,

to assure that the ouput will remain in a Logic High state (i.e., Vo > 2.0V). Common mode transient immunity in a Logic Low level is the maximum

tolerable (negative) dVCM/dt on the falling edge of the common mode pulse signal, VCM to assure that the output will remain in a Logic Low state

(i.e., Vo < 0.8V).

7

Share Link: