DC Electrical Performance Characteristics 1/ (con’t)
(Tc = -55°C to +125°C, +VCC = +15V, -VEE = -15V, VREF = +5.0V, Unless otherwise specified)
Parameter
Symbol
Conditions
Min Max Units
Negative Input
Leakage Current
CH0-CH47
-ISOFFOUTPUT(ALL) VIN = -10V, VEN = 4V, output and all unused
-ISOFFCURRENT(ALL) MUX inputs under test = +10V 2/, 3/
-100 +700 nA
-100 +700 nA
Output Leakage
Current OUTPUTS
(pins 25, 70 & 68)
CURRENTS
(pins 67 & 69)
+IDOFFOUTPUT(ALL) VOUT = +10V, VEN = 4V, output and all
+IDOFFCURRENT(ALL) unused MUX inputs under test = -10V 3/, 4/
-100 +100 nA
-100 +100 nA
Output Leakage
Current OUTPUTS
(pins 25, 70 & 68)
CURRENTS
(pins 67 & 69)
-IDOFFOUTPUT(ALL) VOUT = -10V, VEN = 4V, output and all
-IDOFFCURRENT(ALL)
unused MUX inputs under test = +10V
4/
3/,
-100 +100 nA
-100 +100 nA
Input Clamped
Voltage CH0 - CH47
+VCLMP(0-47)
VEN = 4V, all unused MUX inputs under test +25°C 18.0 23.0 V
are open. 3/
+125°C 18.0 23.5 V
-55°C 17.5 22.5 V
Input Clamped
Voltage CH0 - CH47
-VCLMP(0-47)
+25°C -23.0 -18.0 V
+125°C -23.5 -18.0 V
-55°C -22.5 -17.5 V
Switch ON Resistance
OUTPUTS
(pins 25, 70 & 68)
RDS(ON)(0-47)A
RDS(ON)(0-47)B
VIN = +15V, VEN = 0.8V, IOUT = -1mA
2/, 3/, 5/
VIN = +5V, VEN = 0.8V, IOUT = -1mA
2/, 3/, 5/
500 3000 Ω
500 3000 Ω
RDS(ON)(0-47)C
VIN = -5V, VEN = 0.8V, IOUT = +1mA
2/, 3/, 5/
500 3000 Ω
Switch ON Resistance
CURRENTS
(pins 26, 67 & 69)
RDS(ON)(0-47)A
RDS(ON)(0-47)B
VIN = +15V, VEN = 0.8V, IOUT = -1mA
2/, 3/, 5/
VIN = +5V, VEN = 0.8V, IOUT = -1mA
2/, 3/, 5/
500 3000 Ω
500 3000 Ω
RDS(ON)(0-47)C
VIN = -5V, VEN = 0.8V, IOUT = +1mA
2/, 3/, 5/
500 3000 Ω
Notes:
1/ Measure inputs sequentially. Ground all unused inputs of the MUX under test. VA is the applied input voltage to the MUXes’ address lines A(0-3).
2/ VIN is the applied input voltage to the MUXes’ input channel CH0-CH47.
3/ VEN is the applied input voltage to the MUXes’ enable line En(0-15), En(16-31) and En(32-47).
4/ VOUT is the applied input voltage to the MUXes’ output line OUTPUT(0-15), OUTPUT(16-31), OUTPUT(32-47), CURRENT(0-15) ,
CURRENT(16-31) and CURRENT(32-47).
5/ Negative current is the current flowing out of each of the MUX pins. Positive current is the current flowing into each MUX pin.
6/ If not tested, shall be guaranteed to the specified limits.
Switching Characteristics
(Tc = -55°C to +125°C, VDD = +15V, VEE = -15V, VR = +5.0V, Unless otherwise specified)
Parameter
Switching Test MUX
Symbol
tONA
tOFFA
tONEN
tOFFEN
Conditions
RL = 10KΩ, CL = 50pF
RL = 10KΩ, CL = 50pF
RL = 1KΩ, CL = 50pF
RL = 1KΩ, CL = 50pF
Min Max
10 1500
10 2000
10 1500
10 1000
Units
ns
ns
ns
ns
Aeroflex Circuit Technology
5
SCD8502 REV A 10/26/01 Plainview NY (516) 694-6700