W91590 查看數據表（PDF） - Winbond

零件编号

产品描述 (功能)

生产厂家

W91590

24-MEMORY TONE/PULSE SWITCHABLE DIALER WITH HANDFREE, HOLD AND LOCK FUNCTIONS

Winbond 

W91590 SERIES

PIN DESCRIPTION

SYMBOL 22-PIN 24-PIN

28-PIN I/O

FUNCTION

Column-

Row

Inputs

1−7

&

18−22

1−7

&

20−24

1−8

&

24−28

I The keyboard input may be from either the

standard 9 × 5 keyboard or an inexpensive

single contact (form A) keyboard. Electronic

input from a µC can also be used.

A valid key entry is defined by a single row

being connected to a single column.

XT, XT 9, 10

9, 10

11, 12

I, O A built-in inverter provides oscillation with an

inexpensive 3.579545 MHz crystal or

ceramic resonator.

T/P

11

11

MUTE

13

O The T/P MUTE is a conventional CMOS

N-channel open drain output.

The output transistor is switched on during

pulse and tone mode dialing sequence and

flash break. Otherwise, it is switched off.

HPM

-

-

MUTE

23

O The HPM MUTE is a conventional inverter

output. During pulse dialing, flash, hold, and

mercury mute functions, this pin will output

an active high. It remains in a low state at all

other times.

MODE

15

17

19

I Pulling mode pin to VSS places the dialer in

tone mode.

Pulling mode pin to VDD places the dialer in

pulse mode (M/B = 2:3).

Leaving mode pin floating places the dialer

in pulse mode (M/B = 1:2).

HKS

12

14

16

I Hook switch input.

HKS = 1: On-hook state. Chip in sleeping

mode, no operation.

HKS = 0: Off-hook state. Chip enabled for

normal operation.

HKS pin is pulled to VDD by internal resistor.

DP /C9

13

15

17

O N-channel open drain dialing pulse output

(Figure 1).

Flash key causes DP to go active when in

pulse mode and tone mode.

NC

17

19

22

- No connection.

(W91590) (W91590A) (W91590B/C)

Publication Release Date: July 1995

-3-

Revision A3

Share Link: