W91590 查看數據表（PDF） - Winbond

零件编号

产品描述 (功能)

生产厂家

W91590

24-MEMORY TONE/PULSE SWITCHABLE DIALER WITH HANDFREE, HOLD AND LOCK FUNCTIONS

Winbond 

W91590 SERIES

4. OFF HOOK (or ON HOOK & HFI

), D1 , D2 , …, Dn , S , S , Mn

or Ln

a. D1, D2, ..., Dn will be stored in memory location and will be dialed out.

b. The S key must be pressed after completion of the dialing sequence.

5. D1 , D2 , …, Dn , S , S , i , j

D1, D2, ..., Dn will be stored in memory location Mij and will be dialed out.

6. D1 , D2 , …, Dn , S , S , MEMO , M0j

a. D1, D2, ..., Dn will be stored in memory location M10 to M19 and will be dialed out.

b. MEMO + M0j = M1j.

Repertory Dialing

1. OFF HOOK (or ON HOOK & HFI

2. OFF HOOK (or ON HOOK & HFI

3. OFF HOOK (or ON HOOK & HFI

), Mij or EMi or MER

), MEMO , i , j

), MEMO , M0j

Access Pause

OFF HOOK (or ON HOOK & HFI

1. The pause function can be stored in memory.

), D1 , D2 , R/P , D3 , …, Dn

2. The pause function is executed in normal dialing, redialing, or memory dialing.

3. The pause function timing diagram is shown in Figure 5.

Pulse-to-Tone (*/ T)

OFF HOOK (or ON HOOK & HFI

), D1 , D2 , …, Dn ,

*/T , D1' , D2' , …, Dn'

1. If the mode switch is set to pulse mode, then the output signal will be:

D1, D2, ..., Dn, Pause (3.6s) , D1', D2', ..., Dn'

(Pulse)

(Tone)

2. If the mode switch is set to tone mode, then the output signal will be:

D1, D2, ..., Dn, * , D1', D2', ..., Dn'

(Tone)

(Tone) (Tone)

-8-

Share Link: