AD7280A 查看數據表（PDF） - Analog Devices

零件编号

产品描述 (功能)

生产厂家

AD7280A

Lithium Ion Battery Monitoring System

Analog Devices 

AD7280A

Pin No.

43

44

45

46

47

48

Mnemonic

SDIhi

CNVSThi

SDOhi

SCLKhi

CShi

PDhi

Description

Serial Data Input in Daisy-Chain Mode. The data from each AD7280A in the daisy chain is passed through the

SDOlo output and the SDIhi input of each AD7280A in the chain and is supplied to the DSP/microprocessor

through the SDO output of the master AD7280A. This input should be connected to the SDOlo output of the

AD7280A immediately above it in potential in the daisy chain. The AD7280A at the highest potential in the

stack does not require a serial data input in daisy-chain mode; in this case, the pin should be connected to

VDD through a 1 kΩ resistor.

Conversion Start Output in Daisy-Chain Mode. The convert start signal from the DSP/microprocessor supplied

to the CNVST input of the master AD7280A is passed through each AD7280A by means of the CNVST input

and the CNVSThi output. This output should be connected to the CNVST pin of the AD7280A immediately

above it in potential in the daisy chain. The AD7280A at the highest potential in the stack does not require

a daisy-chain conversion start output; in this case, the pin should be connected to VDD.

Serial Data Output in Daisy-Chain Mode. The serial data input from the DSP/microprocessor supplied to the

SDI input of the master AD7280A is passed through each AD7280A by means of the SDI input and the SDOhi

output. This output should be connected to the SDI input of the AD7280A immediately above it in potential

in the daisy chain. The AD7280A at the highest potential in the stack does not require a daisy-chain serial

data output; in this case, the pin should be connected to VDD.

Serial Clock Output in Daisy-Chain Mode. The clock signal from the DSP/microprocessor supplied to the

SCLK input of the master AD7280A is passed through each AD7280A by means of the SCLK input and the

SCLKhi output. This output should be connected to the SCLK input of the AD7280A immediately above it in

potential in the daisy chain. The AD7280A at the highest potential in the stack does not require a daisy-chain

serial clock output; in this case, the pin should be connected to VDD.

Chip Select Output in Daisy-Chain Mode. The chip select signal from the DSP/microprocessor supplied to the

CS input of the master AD7280A is passed through each AD7280A by means of the CS input and the CShi

output. This output should be connected to the CS input of the AD7280A immediately above it in potential

in the daisy chain. The AD7280A at the highest potential in the stack does not require a daisy-chain chip

select output; in this case, the pin should be connected to VDD.

Power-Down Output in Daisy-Chain Mode. The power-down signal from the DSP/microprocessor supplied

to the PD input of the master AD7280A is passed through each AD7280A by means of the PD input and the

PDhi output. This output should be connected to the PD input of the AD7280A immediately above it in

potential in the daisy chain. The AD7280A at the highest potential in the stack does not require a daisy-chain

power-down output; in this case, the pin should be connected to VDD.

Rev. 0 | Page 10 of 48

Share Link: