AD827A 查看數據表（PDF） - Analog Devices
零件编号
产品描述 (功能)
生产厂家
AD827A Datasheet PDF : 12 Pages
| |||
AD827
Model
OUTPUT RESISTANCE
POWER SUPPLY
Operating Range
Quiescent Current
TRANSISTOR COUNT
Conditions
VS
Open Loop
AD827J
Min Typ Max
15
AD827A/S
Min Typ Max
15
Unit
Ω
TMIN to TMAX
TMIN to TMAX
±5 V
± 15 V
± 4.5
± 18
10 13
16
10.5 13.5
16.5
92
± 4.5
± 18
V
10 13
mA
16.5/17.5 mA
10.5 13.5
mA
17/18
mA
92
NOTES
1 Offset voltage for the AD827 is guaranteed after power is applied and the device is fully warmed up. All other specifications are measured using high speed test equipment,
approximately 1 second after power is applied.
2 Full Power Bandwidth = Slew Rate/2 π VPEAK.
3 Gain = +1, rising edge.
All min and max specifications are guaranteed.
Specifications subject to change without notice.
ABSOLUTE MAXIMUM RATINGS1
Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 18 V
Internal Power Dissipation2
Plastic (N) Package (Derate at 10 mW/°C) . . . . . . . . 1.5 W
Cerdip (Q) Package (Derate at 8.7 mW/°C) . . . . . . . 1.3 W
Small Outline (R) Package (Derate at 10 mW/°C) . . . 1.5 W
LCC (E) Package (Derate at 6.7 mW/°C) . . . . . . . . . 1.0 W
Input Common-Mode Voltage . . . . . . . . . . . . . . . . . . . . . ± VS
Differential Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . 6 V
Output Short Circuit Duration3 . . . . . . . . . . . . . . . . Indefinite
Storage Temperature Range (N, R) . . . . . . . –65°C to +125°C
Storage Temperature Range (Q) . . . . . . . . . –65°C to +150°C
Operating Temperature Range
AD827J . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C
AD827A . . . . . . . . . . . . . . . . . . . . . . . . . . . –40°C to +85°C
AD827S . . . . . . . . . . . . . . . . . . . . . . . . . . –55°C to +125°C
Lead Temperature Range
(Soldering to 60 sec) . . . . . . . . . . . . . . . . . . . . . . . . . 300°C
NOTES
1 Stresses above those listed under Absolute Maximum Ratings may cause perma-
nent damage to the device. This is a stress rating only, and functional operation of
the device at these or any other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute maximum ratings
for extended periods may affect device reliability.
2 Maximum internal power dissipation is specified so that TJ does not exceed 175°C
at an ambient temperature of 25°C.
Thermal Characteristics:
MiniDIP: θJA = 100°C/W; θJC = 33°C/ W
Cerdip: θJA = 110°C/W; θJC = 30°C/W
16-Lead Small Outline Package: θJA = 100°C/W
20-Lead LCC: θJA = 150°C/W; θJC = 35°C/W
3 Indefinite short circuit duration is only permissible as long as the absolute
maximum power rating is not exceeded.
ORDERING GUIDE
Model
Temperature
Range
Package
Description
Package
Option
AD827JN
0°C to +70°C 8-Lead Plastic DIP N-8
AD827JR
0°C to +70°C 16-Lead Plastic SO R-16
AD827AQ
–40°C to +85°C 8-Lead Cerdip
Q-8
AD827SQ
–55°C to +125°C 8-Lead Cerdip
Q-8
AD827SQ/883B –55°C to +125°C 8-Lead Cerdip
Q-8
5962-9211701MPA –55°C to +125°C 8-Lead Cerdip
Q-8
AD827SE/883B –55°C to +125°C 20-Lead LCC
E-20A
5962-9211701M2A –55°C to +125°C 20-Lead LCC
E-20A
AD827JR-REEL 0°C to +70°C Tape & Reel
AD827JChips
0°C to +70°C Die
AD827SChips
–55°C to +125°C Die
METALLIZATION PHOTOGRAPH
Contact factory for latest dimensions.
Dimensions shown in inches and (mm).
Substrate is connected to V+.
REV. C
–3–
Share Link: 