AD846 查看數據表（PDF） - Analog Devices
零件编号
产品描述 (功能)
生产厂家
AD846 Datasheet PDF : 12 Pages
| |||
AD846
Model
DIFFERENTIAL GAIN
DIFFERENTIAL PHASE
POWER SUPPLY
Rated Performance
Operating Range
Quiescent Current
TRANSISTOR COUNT
Conditions
F = 4.4 MHz, RL = 100 Ω
F = 4.4 MHz, RL = 100 Ω
AD846A
Min Typ Max
0.01
0.028
TMIN –TMAX
± 15
±5
؎18
5 6.5
72
AD846B
Min Typ Max
0.01
0.028
± 15
±5
؎18
5 6.5
72
AD846S
Min Typ Max
0.01
0.028
± 15
؎5
؎18
57
72
Units
%
Degrees
V
V
mA
NOTES
1Input Offset Voltage Specifications are guaranteed after 5 minutes at TA = +25°C.
2Test Conditions: +VS = 15 V, –VS = 5 V to 18 V and +VS = 5 V to 18 V, –VS = 15 V.
3Bias Current Specifications are guaranteed maximum after 5 minutes at TA = +25°C.
4FPBW = Slew Rate/2 π VPEAK.
5Total Harmonic Distortion.
All min and max specifications are guaranteed. Specifications shown in boldface are tested on all production units at final electrical test. Results from those tests are
used to calculate outgoing quality levels.
Specifications subject to change without notice.
ABSOLUTE MAXIMUM RATINGS1
Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 18 V
Internal Power Dissipation2
Plastic Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5 W
Cerdip Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.3 W
Common-Mode Input Voltage, Max Safe . . . . . . . |VS| – 3 V
Output Short Circuit Duration . . . . . . . . . . . . . . . . Indefinite
Differential Input Voltage . . . . . . . . . . . . . . . . . . . . . . . ± 1 V
Continuous Input Current
Inverting or Noninverting . . . . . . . . . . . . . . . . . . . . 2.0 mA
Storage Temperature Range (Q) . . . . . . . . . –65°C to +150°C
Storage Temperature Range (N) . . . . . . . . . –65°C to +125°C
Storage Temperature Range (R) . . . . . . . . . –65°C to +125°C
Operating Temperature Range
AD846A/B . . . . . . . . . . . . . . . . . . . . . . . . –40°C to +85°C
AD846S . . . . . . . . . . . . . . . . . . . . . . . . . . –55°C to +125°C
Lead Temperature Range (Soldering 60 sec) . . . . . . . +300°C
ESD Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3500 V
NOTES
1Stresses above those listed under Absolute Maximum Ratings may cause perma-
nent damage to the device. This is a stress rating only; the functional operation of
the device at these or any other conditions above those indicated in the operational
sections of this specification is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect device reliability.
2Maximum internal power dissipation is specified so that TJ does not exceed
+175°C at an ambient temperature of +25°C, derate cerdip (Q) package at
8.7 mW/°C and plastic (N) package at 10 mW/°C.
Plastic Package: θJA = 100°C/Watt, θJC = 33°C/W.
Cerdip Package: θJA = 110°C/Watt, θJC = 30°C/W.
SOIC Package: θJA = 100°C/Watt, θJC = 33°C/W.
ORDERING GUIDE
Model1
Temperature Range
Package
Option2
AD846AN
AD846BN
AD846AQ
AD846BQ
AD846SQ
AD846SQ/883B
5962-8964601PA
AD846AR-16
AD846AR-16-REEL
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–55°C to +125°C
–55°C to +125°C
–55°C to +125°C
–40°C to +85°C
–40°C to +85°C
N-8
N-8
Q-8
Q-8
Q-8
Q-8
Q-8
R-16
R-16
NOTES
1“A” and “S” grade chips are also available.
2N = Plastic DIP Package; Q = Cerdip Package, R = SOIC Package
METALIZATION PHOTOGRAPH
Dimensions shown in inches and (mm).
Consult factory for latest dimensions.
REV. C
–3–
Share Link: 