ADCMP609(RevPrA) 查看數據表（PDF） - Analog Devices

零件编号

产品描述 (功能)

生产厂家

ADCMP609
(Rev.:RevPrA)

Rail-to-Rail, Fast, Low Power, 2.5 V to 5.5 V, Single-Supply TTL/CMOS Comparators

Analog Devices 

Preliminary Technical Data

ABSOLUTE MAXIMUM RATINGS

Table 2.

Parameter

Rating

Supply Voltages

Input Supply Voltage (VCCI to GND)

Output Supply Voltage

(VCCO to GND)

Positive Supply Differential

(VCCI − VCCO)

Input Voltages

−0.5 V to +6.0 V

−0.5 V to +6.0 V

−6.0 V to +6.0 V

Input Voltage

Differential Input Voltage

Maximum Input/Output Current

Shutdown Control Pin

Applied Voltage (HYS to GND)

Maximum Input/Output Current

Latch/Hysteresis Control Pin

Applied Voltage (HYS to GND)

Maximum Input/Output Current

−0.5 V to VCCI + 0.5 V

±(VCCI + 0.5 V)

±50mA

−0.5 V to Vcco + 0.5 V

±50 mA

−0.5 V to VCCO + 0.5 V

±50 mA

Output Current

Temperature

Operating Temperature, Ambient

Operating Temperature, Junction

Storage Temperature Range

±50 mA

−40°C to +125°C

150°C

−65°C to +150°C

ADCMP608/ADCMP609

Stress above those listed under Absolute Maximum Ratings may

cause permanent damage to the device. This is a stress rating

only and functional operation of the device at these or any other

conditions above those indicated in the operational sections of

this specification is not implied. Exposure to absolute

maximum rating conditions for extended periods may affect

device reliability.

THERMAL RESISTANCE

θJA is specified for the worst-case conditions, that is, a device

soldered in a circuit board for surface-mount packages.

Table 3. Thermal Resistance

Package Type

θJA 1

ADCMP608 SC70 6-lead

426

ADCMP609 MSOP 8-lead

130

Unit

°C/W

°C/W

1 Measurement in still air.

ESD CAUTION

ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on

the human body and test equipment and can discharge without detection. Although this product features

proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy

electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance

degradation or loss of functionality.

Rev. PrA | Page 5 of 16

Share Link: