ADJD-S311-CR999 查看數據表（PDF） - Avago Technologies
零件编号
产品描述 (功能)
生产厂家
ADJD-S311-CR999 Datasheet PDF : 20 Pages
| |||
Minimum sensitivity (note 3)
Parameter
Irradiance
Responsivity
Symbol
Re
Conditions
lP = 460 nm, B
Refer Note 9
lP = 542 nm, G
Refer Note 10
lP = 645 nm, R
Refer Note 11
lP = 645 nm, Clear
Refer Note 11
Minimum
Typical (Note 3)
152
Maximum
178
254
264
Units
LSB/ (mWcm-2)
Maximum sensitivity (note 3)
Parameter Symbol
Conditions
Irradiance
Re
Responsivity
lP = 460 nm, B
Refer Note 9
lP = 542 nm, G
Refer Note 10
lP = 645 nm, R
Refer Note 11
lP = 645 nm, Clear
Refer Note 11
Saturation Irradiance for minimum sensitivity (note 12)
Parameter
Saturation
Irradiance
Symbol
Conditions
lP = 460 nm, B
Refer Note 9
lP = 542 nm, G
Refer Note 10
lP = 645 nm, R
Refer Note 11
lP = 645 nm, Clear
Refer Note 11
Saturation irradiance for maximum sensitivity (note 12)
Minimum
Minimum
Typical (Note 3)
3796
4725
6288
6590
Typical (Note 3)
6.73
5.74
4.03
3.87
Maximum
Maximum
Units
LSB/ (mWcm-2)
Units
mW/cm2
Parameter
Saturation
Irradiance
Symbol
Conditions
lP = 460 nm, B
Refer Note 9
lP = 542 nm, G
Refer Note 10
lP = 645 nm, R
Refer Note 11
lP = 645 nm, Clear
Refer Note 11
Minimum
Typical (Note 3)
0.27
Maximum
0.22
0.16
0.16
Units
mW/cm2
Notes
1. The “Absolute Maximum Ratings” are those values beyond which damage to the device may occur. The device should not be operated at
these limits. The parametric values defined in the “Electrical Specifications” table are not guaranteed at the absolute maximum ratings. The
“Recommended Operating Conditions” table will define the conditions for actual device operation.
2. Unless otherwise specified, all voltages are referenced to ground.
3. Specified at room temperature (25°C) and VDDD = VDDA = 2.5V.
4. Applies to all DI pins.
5. Applies to all digital output pins. SDASLV go tri-state when output logic high. Minimum VOH depends on the pull-up resistor value.
Share Link: 