ADM1034ARQ-REEL7 查看數據表（PDF） - Analog Devices

零件编号

产品描述 (功能)

生产厂家

ADM1034ARQ-REEL7

Thermal Monitor and Fan Speed (RPM) Controller

Analog Devices 

ADM1034

ABSOLUTE MAXIMUM RATINGS

Table 2.

Parameter

Rating

Positive Supply Voltage (VCC)

−0.3 V to +6.5 V

Voltage on Any Input or Output Pin except

FAN_FAULT and LOCATION

−0.3 V to +6.5 V

Voltage on FAN_FAULT1

VCC

Voltage on LOCATION

Input Current at Any Pin

Maximum Junction Temperature (TJ max)

Storage Temperature Range

VCC + 0.3 V

±20 mA

150°C

−65°C to +150°C

Lead Temperature, Soldering (10 s)

IR Reflow Peak Temperature

ESD Rating—All Pins

300°C

220°C

1500 V

1 During power-up the voltage on FAN_FAULT should not be higher than VCC.

Stresses above those listed under Absolute Maximum Ratings

may cause permanent damage to the device. This is a stress

rating only; functional operation of the device at these or any

other conditions above those indicated in the operational

section of this specification is not implied. Exposure to Absolute

Maximum Rating conditions for extended periods may affect

device reliability.

THERMAL CHARACTERISTICS

16-Lead QSOP Package:

θJA = 150°C/W, θJC = 39°C/W

ESD CAUTION

ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on

the human body and test equipment and can discharge without detection. Although this product features

proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy

electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance

degradation or loss of functionality.

Rev. 0 | Page 6 of 40

Share Link: