ADP196 查看數據表（PDF） - Analog Devices
零件编号
产品描述 (功能)
生产厂家
ADP196 Datasheet PDF : 13 Pages
| |||
Data Sheet
FEATURES
Low RDSON: 10 mΩ (WLCSP) or 27 mΩ (LFCSP)
Wide input voltage range: 1.8 V to 5.5 V
Quick output discharge (QOD) circuit (ADP196-01)
3 A continuous operating current to 70°C
1.2 V logic-compatible enable input
Low 25 μA quiescent current, VIN = 1.8 V
Low 40 μA quiescent current, VIN = 5.5 V
Overtemperature and overcurrent protection
Ultralow shutdown current: <1 μA
Ultrasmall 1.0 mm × 1.5 mm, 0.5 mm pitch, 6-ball WLCSP
Tiny 2.0 mm × 2.0 mm × 0.55 mm, 0.65 mm pitch, 6-lead LFCSP
APPLICATIONS
Mobile phones
Digital cameras and audio devices
Portable and battery-powered equipment
GENERAL DESCRIPTION
The ADP196 is a high-side load switch designed for operation
from 1.8 V to 5.5 V. This load switch provides power domain
isolation, helping to extend battery operation. The device contains
a low on-resistance, N-channel MOSFET that supports more
than 3 A of continuous current and minimizes power loss. In
addition, RDSON is constant, independent of the VIN voltage.
The low 25 μA quiescent current and ultralow shutdown current
make the ADP196 ideal for battery-powered portable equipment.
The built-in level shifter for enable logic makes the ADP196
compatible with many processors and GPIO controllers.
Overtemperature protection circuitry is activated if the junction
temperature exceeds 125°C, thereby protecting the ADP196 and
downstream circuits from potential damage. Overcurrent pro-
tection is provided in the form of constant current limiting.
5 V, 3 A, Logic Controlled
High-Side Power Switch
ADP196
TYPICAL APPLICATION CIRCUIT
VIN
VOUT
+
–
GND
ON
EN OFF
CHARGE PUMP
OVERCURRENT
AND SLEW RATE
CONTROL
LOAD
OVERTEMPERATURE
PROTECTION
ADP196
Figure 1.
The ADP196-01 incorporates an internal quick output discharge
circuit to discharge the output capacitance when the ADP196-01
output is disabled.
The ADP196 in the WLCSP package occupies minimal printed
circuit board (PCB) area with a footprint of less than 1.5 mm2
and a height of 0.60 mm.
The ADP196 is available in an ultrasmall, 1.0 mm × 1.5 mm,
0.5 mm pitch, 6-ball WLCSP and a 2.0 mm × 2.0 mm × 0.55 mm,
0.65 mm pitch, 6-lead LFCSP.
Rev. 0
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
©2013 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com
Share Link: 