DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

CMPWR101 查看數據表(PDF) - California Micro Devices Corp

零件编号
产品描述 (功能)
生产厂家
CMPWR101
CALMIRCO
California Micro Devices Corp CALMIRCO
CMPWR101 Datasheet PDF : 6 Pages
1 2 3 4 5 6
CALIFORNIA MICRO DEVICES
CMPWR101
Typical Thermal Characteristics
The overall junction to ambient thermal resistance (θJA)
for device power dissipation (PD) consists primarily of
two paths in series. The first path is the junction to the
case (θJC) which is defined by the package style, and the
second path is case to ambient (θCA) thermal resistance
which is dependent on board layout. The final operating
junction temperature for any set of conditions can be
estimated by the following thermal equation:
TJUNC = TAMB + PD (θJC ) + PD (θCA )
= TAMB + PD (θJA)
The CMPWR101 uses a standard SOIC package. When
this package is mounted on a double sided printed
circuit board with two square inches of copper allocated
for heat spreading, the resulting overall θJA is 85°C/W.
Based on maximum power dissipation of 0.43W
(1.7V x 250mA) with an ambient of 70°C the resulting
junction temperature will be:
TJUNC = TAMB + PD (θJA )
= 70°C + 0.43W (80°C/W)
= 70°C + 37°C
= 103°C
Thermal characteristics were measured using a double
sided board with two square inches of copper area
connected to the GND pins for heat spreading.
Measurements showing performance up to junction
temperature of 125°C were performed under light load
conditions (5mA). This allows the ambient temperature
to be representative of the internal junction temperature.
Note: The use of multi-layer board construction with
power planes will further enhance the thermal perfor-
mance of the package. In the event of no copper area
being dedicated for heat spreading, a multi-layer board
construction, using only the minimum size pad layout,
will typically provide the CMPWR101 with an overall θJA
of 100°C/W, which allows up to 0.5W to be safely
dissipated.
3.300
3.298
3.296
3.294
3.292
3.290
3.288
3.286
3.284
20
30
40
50
60
70
Ambient Temperature (˚C)
Figure 13. Regulator VOUT vs TAMB (250mA Load)
4.18
4.16
4.14
4.12
4.10
4.08
25
50
75
100
125
Junction Temperature (˚C)
Figure 14. Deselect Threshold vs TJUNCT
0.36
0.34
0.32
0.30
0.28
0.26
0.24
0,22
0.20
20
30
40
50
60
70
Ambient Temperature (˚C)
Figure 15. Switch Resistance vs Ambient Temperature
©2001 California Micro Devices Corp. All rights reserved. SmartORis a trademark of California Micro Devices Corporation.
215 Topaz Street, Milpitas, California 95035  Tel: (408) 263-3214
Fax: (408) 263-7846
6
www.calmicro.com
3/6/2001

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]