AH1807(2012) 查看數據表（PDF） - Diodes Incorporated.
零件编号
产品描述 (功能)
生产厂家
AH1807 Datasheet PDF : 11 Pages
| |||
AH1807
Absolute Maximum Ratings (Note 6) (@TA = +25°C, unless otherwise specified.)
Symbol
Characteristics
Values
Unit
VDD
VDD REV
IOUTPUT
B
PD
Ts
TJ
ESD HBM
Supply Voltage (Note 7)
Reverse Supply Voltage
Output Current (source and sink)
Magnetic Flux Density
Package Power Dissipation
Storage Temperature Range
Maximum Junction Temperature
Human Body Model ESD capability
SOT553
SIP-3L
7
V
-0.3
V
2.5
mA
Unlimited
230
mW
230
-65 to +150
°C
150
°C
6
kV
Notes:
6. Stresses greater than the 'Absolute Maximum Ratings' specified above may cause permanent damage to the device. These are stress ratings only;
functional operation of the device at these or any other conditions exceeding those indicated in this specification is not implied. Device reliability may be
affected by exposure to absolute maximum rating conditions for extended periods of time.
7. The absolute maximum VDD of 7V is a transient stress rating and is not meant as a functional operating condition. It is not recommended to
operate the device at the absolute maximum rated conditions for any period of time.
Recommended Operating Conditions (@TA = +25°C, unless otherwise specified.)
Symbol
VDD
TA
Characteristic
Supply Voltage
Operating Temperature Range
Operating
Operating
Conditions
Rating
Unit
2.5 to 5.5
V
-40 to +125
°C
Electrical Characteristics (@TA = +25°C, VDD = 3V, unless otherwise specified.)
Symbol
VOUT
IOFF
Characteristic
Output On Voltage
Output Leakage Current
IDD(awake)
IDD(sleep)
Supply Current
IDD(sleep)
IDD(avg)
Tawake
Tperiod
D.C.
Average Supply Current
Awake Time
Period
Duty Cycle
Conditions
IOUT = 1mA
VOUT = 3.6V, Output off
During ‘awake’ period,
TA = +25°C, VDD = 3V
During ‘awake’ period,
TA = -40 to +125°C, VDD = 2.5V to 5.5V
During ‘sleep’ period,
TA = +25°C, VDD = 3V
During ‘sleep’ period,
TA = -40 to +125°C, VDD = 2.5V to 5.5V
TA = 25°C, VDD = 3V
TA = -40 to +125°C, VDD = 2.5V to 5.5V
(Note 8)
(Note 8)
Min
Typ
Max
Unit
—
0.1
0.3
V
—
< 0.1
1
µA
—
3
6
mA
—
—
12
mA
—
5
10
µA
—
—
28
µA
—
8
16
µA
—
-
40
µA
—
75
125
µs
—
75
125
ms
—
0.1
—
%
Note:
8. When power is initially turned on, the operating VDD must be within its correct operating range (2.5V to 3.6V) to guaranteed the output sampling.
The output state is valid after the second operating cycle (typical 150ms).
IDD(awake)
Tperiod
Tawake
Tsleep
IDD(sleep)
0
AH1807
Document number: DS35524 Rev. 1 - 2
3 of 11
www.diodes.com
Sample and output
latched
November 2012
© Diodes Incorporated
Share Link: 