AK6001AF 查看數據表（PDF） - Asahi Kasei Microdevices

零件编号

产品描述 (功能)

生产厂家

AK6001AF

I2C bus 2K / 4K / 16Kbit Serial CMOS EEPROM

Asahi Kasei Microdevices 

ASAHI KASEI

[AK6002A/04A/08A]

[ACKNOWLEDGE]

ACKNOWLEDGE is a software convention used to indicate successful data transfers. The

transmitting device will release the bus after transmitting eight bits. During the next clock (ninth

clock), the receiver will pull the SDA line to LOW to acknowledge that it received the eight bits of

data.

The AK6002A/04A/08A will respond with an acknowledge after recognition of a start condition and

its slave address. If both the device and a write operation have been selected, the

AK6002A/04A/08A will respond with an acknowledge after the receipt of each subsequent eight bit

word.

In the read mode the AK6002A/04A/08A slave will transmit eight bits of data, release the SDA line

and monitor the line for an acknowledge. If an acknowledge is detected and no STOP condition is

generated by the master, the slave will continue to transmit data. If an acknowledge is not detected,

the slave will terminate further data transmissions and await the STOP condition to return to the

standby power mode.

Figure3. Acknowledge Response from Receiver

DAI01E-01

-4-

1999/10

Share Link: