AN726
6.2. Alternate Configuration
Figure 20 shows the output network configuration used by the Revision 1.0 hardware. An alternate output network
shown in Figure 21 may provide better performance than the original configuration.
placed as close to the
device as possible
PB4.0 (R+) L
C
CB
placed as close to the
speaker connectors as
possible
FB
Cg
PB4.1 (R-) L
C
FB
Cg
Figure 21. Alternate Class-D Output Network—Direct Drive
For the alternate configuration, the recommended components for the board are shown in Table 5.
Table 5. Class-D ToolStick Alternate Output Network Recommended Components
Reference
L
C
Cg
CB
Value
~3.3 µH, 1.5 A
~2.2 µF
~20 pF
~0.47 µF
Rev. 0.1
19