AT89LS53 查看數據表（PDF） - Atmel Corporation

零件编号

产品描述 (功能)

生产厂家

AT89LS53

8-Bit Microcontroller with 12K Bytes Flash

Atmel Corporation 

AT89LS53

Dual Data Pointer Registers To facilitate accessing exter-

nal data memory, two banks of 16 bit Data Pointer Regis-

ters are provided: DP0 at SFR address locations 82H-83H

and DP1 at 84H-85H. Bit DPS = 0 in SFR WCON selects

DP0 and DPS = 1 selects DP1. The user should always ini-

talize the DPS bit to the appropriate value before accessing

the respective Data Pointer register.

Power Off Flag The Power Off Flag (POF) is located at

bit_4 (PCON.4) in the PCON SFR. POF is set to “1” during

power up. It can be set and reset under software control

and is not affected by RESET.

Table 3. WCON—Watchdog Control Register

WCON Address = 96H

Reset Value = 0000 0010B

PS2

PS1

PS0

reserved reserved DPS

WDTRST WDTEN

Bit 7

6

5

4

3

2

1

0

Symbol Function

PS2

Prescaler Bits for the Watchdog Timer. When all three bits are set to “0”, the watchdog timer has a nominal

PS1

period of 16 ms. When all three bits are set to “1”, the nominal period is 2048 ms.

PS0

DPS

Data Pointer Register Select. DPS = 0 selects the first bank of Data Pointer Register, DP0, and DPS = 1

selects the second bank, DP1

WDTRST Watchdog Timer Reset. Each time this bit is set to “1” by user software, a pulse is generated to reset the

watchdog timer. The WDTRST bit is then automatically reset to “0” in the next instruction cycle. The

WDTRST bit is Write-Only.

WDTEN Watchdog Timer Enable Bit. WDTEN = 1 enables the watchdog timer and WDTEN = 0 disables the

watchdog timer.

7

0851C–MICRO–3/06

Share Link: