B41161A3337M000 查看數據表（PDF） - EPCOS AG
零件编号
产品描述 (功能)
生产厂家
B41161A3337M000 Datasheet PDF : 11 Pages
| |||
B41161
Standard series 125 °C
11 Do not apply excessive force to the leads and terminals. Do not move the capacitor after
soldering it onto the PC board and do not carry the PC board by gripping the capacitor.
Observe the following rules to prevent undue stress to the capacitor:
a Do not tilt or bend the capacitor after soldering.
b Ensure that the terminal spacing matches the corresponding hole spacing on the PC board.
12 The aluminum case is not insulated from the cathode. Do not place a conductor under the
aluminum capacitors on the PC board as this may cause a short circuit. The case and top of
capacitors used in switched mode power supplies have a high-voltage-resistant heat shrink
sleeve to ensure safe usage.
13 The leads of capacitors with a case diameter exceeding 14 mm cannot be used for fixing.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 10 of 11
Share Link: 